BS 919-3-2007
螺纹规限值和公差.ISO 米制螺纹规用规范

Screw gauge limits and tolerances – Part 3: Specification for gauges for screw threads of ISO metric form

BS 919-3-2007 发布历史

This Part of BS 919 specifies requirements for the following types of gauges for checking ISO metric screw threads of nominal diameter 1 mm and larger made in accordance with BS 3643. a) Screw gauges: 1) GO and NOT GO screw plug gauges; 2) GO and NOT GO screw ring gauges, solid type; 3) GO and NOT GO screw ring gauges, adjustable type; 4) GO and NOT GO screw calliper gauges, adjustable type. b) GO and NOT GO plain plug gauges and GO and NOT GO calliper and ring gauges for the crest diameters of product threads. c) Setting plugs for GO and NOT GO adjustable screw ring gauges and for GO and NOT GO screw calliper gauges: 1) double length; 2) single length. d) GO and NOT GO check plug gauges for solid type GO and NOT GO screw ring gauges. e) NOT GO wear check plug gauges for solid type GO and NOT GO screw ring gauges. Annex A provides guidance on the functions and methods of use of the various types of gauges and Annex B recommends a procedure for the settlement of disputes arising when borderline products are inspected. Guidance on the hardness of gauges is given in Annex C, and Annex D provides information on the reference temperature.

BS 919-3-2007由英国标准学会 GB-BSI 发布于 2007-10-31，并于 2007-10-31 实施。

BS 919-3-2007 在中国标准分类中归属于: J05 结构要素，在国际标准分类中归属于: 21.040.10 公制螺纹。

BS 919-3-2007 发布之时，引用了标准

• BS 1044-1-1964 量规毛坯规范.塞规、环规与卡规

BS 919-3-2007的历代版本如下：

• 1968年12月31日 BS 919-3-1968 螺纹量规极限和公差规范.第3部分:ISO 米制螺纹量规
• 2007年10月31日 BS 919-3-2007 螺纹规限值和公差.ISO 米制螺纹规用规范

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS 919-3-2007 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS 919-3-2007

发布日期

2007年10月31日

实施日期

2007年10月31日

废止日期

无

中国标准分类号

J05

国际标准分类号

21.040.10

发布单位

GB-BSI

引用标准

BS 1044-1-1964

被代替标准

BS 919-3-1968 07/30158517 DC-2007

适用范围

This Part of BS 919 specifies requirements for the following types of gauges for checking ISO metric screw threads of nominal diameter 1 mm and larger made in accordance with BS 3643. a) Screw gauges: 1) GO and NOT GO screw plug gauges; 2) GO and NOT GO screw ring gauges, solid type; 3) GO and NOT GO screw ring gauges, adjustable type; 4) GO and NOT GO screw calliper gauges, adjustable type. b) GO and NOT GO plain plug gauges and GO and NOT GO calliper and ring gauges for the crest diameters of product threads. c) Setting plugs for GO and NOT GO adjustable screw ring gauges and for GO and NOT GO screw calliper gauges: 1) double length; 2) single length. d) GO and NOT GO check plug gauges for solid type GO and NOT GO screw ring gauges. e) NOT GO wear check plug gauges for solid type GO and NOT GO screw ring gauges. Annex A provides guidance on the functions and methods of use of the various types of gauges and Annex B recommends a procedure for the settlement of disputes arising when borderline products are inspected. Guidance on the hardness of gauges is given in Annex C, and Annex D provides information on the reference temperature.

BS 919-3-2007系列标准

谁引用了BS 919-3-2007 更多引用