DIN EN ISO 13628-6-2008
石油和天然气工业.海底生产系统设计和操作.第6部分:海底生产控制系统(ISO 13628-6:2006)
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006); English version EN ISO 13628-6:2006
DIN EN ISO 13628-6-2008 发布历史
This standard is applicable to design, fabrication, testing, installation and operation of subsea production control systems in the oil and natural gas exploration. It contains requirements to subsea production control systems. This part of ISO 13628 covers surface control system equipment, subsea-installed control system equipemnt and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services. Where applicable, this part of ISO 13628 can be used for equipment on multiple-well applications. This part of ISO 13628setablishes design standards for systems, subsystems, components and operating fluids in order to provide for the safe and functional control of subsea production equipment. This part of ISO 13628contains various types of information related to subsea production control systems. They are -informative data that provide an overview of the architecture and general functionality of control systems for the purpose of introduction and information ; -basic prescriptive data that shall be adhered to by all types of control system; -selective prescriptive data that are control-system-type sensitive and shall be adhered to only when they are relevant; -optional data or requirements that need be adopted only when considered necessary either by the purchaser or the vendor. In view of the diverse nature of the data provided, control system purchasers and specifiers are advised to select from this part of ISO 13628 only the provisions needed for the application at hand. Failure to adopt a selsctive approach to the provisions contained herein can lead to overspecification and higher purchase costs. Rework and repair of used equipment are beyond the scope of this part of ISO 13628.
DIN EN ISO 13628-6-2008由德国标准化学会 DE-DIN 发布于 2008-01。
DIN EN ISO 13628-6-2008 在中国标准分类中归属于: E94 海洋石油作业用设备，在国际标准分类中归属于: 75.180.10 勘探和钻采设备。
DIN EN ISO 13628-6-2008 发布之时，引用了标准
- ISO 4406-1999 液压传动 油液 固体颗粒污染等级代号法
- ISO 6073 石油产品 石油基液压液体积模数的预测
- ISO 7498 信息处理系统开放系统互连基本参考模型第3部分:命名和寻址
- ISO 9606-1 焊工合格考试.熔焊.第1部分:钢*， 2012-07-01 更新
- ISO 9606-2 焊工的认可试验.熔焊.第2部分:铝和铝合金
- ISO 9956 金属材料焊接程序的规范和批准.第8部分:生产前焊接试验的批准
- ISO 10423 石油和天然气工业.钻井和生产设备.井口和树木设备*， 2022-03-08 更新
- ISO 10945 液压传动 充气蓄能器 气口尺寸
- ISO/TR 10949 液压传动.元件清洁度.从生产到安装的过程中元件清洁度的取得和控制指南
- ISO 13628-4 石油和天然气工业.水下采油系统的设计和操作.第4部分:井口和采油树设备*， 2010-12-15 更新
- ISO 13628-5 石油和天然气工业.海底采油系统的设计和操作.第5部分:海底缆线和管道*， 2009-12-01 更新
- ISO 15607 金属材料焊接程序的规范和资格 - 一般规则*， 2019-10-07 更新
- ISO 15609-2 金属材料焊接程序的规范和资格 - 焊接程序规范 - 第2部分:气焊*， 2019-08-16 更新
- ISO 15610 金属材料焊接程序规范和合格鉴定.基于试验焊接消耗品的合格鉴定
- ISO 15611 金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定
- ISO 15612 金属材料的焊接程序规范和鉴定.通过标准焊接程序的采用进行合格鉴定
- ISO 15613 金属材料的焊接程序规范和鉴定.基于预生产焊接试验的鉴定
- ISO 15614-1 金属材料焊接工艺的规范和评定.焊接工艺试验.第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊.修改件1*， 2019-07-09 更新
- ISO/TS 16431 液压系统总成 清洁度检验
- ANSI/ASME B31.3 工艺管道*， 2022-07-18 更新
* 在 DIN EN ISO 13628-6-2008 发布之后有更新，请注意新发布标准的变化。
DIN EN ISO 13628-6-2008的历代版本如下：
- 2008年01月 DIN EN ISO 13628-6-2008 石油和天然气工业.海底生产系统设计和操作.第6部分:海底生产控制系统(ISO 13628-6:2006)
- 标准号
- DIN EN ISO 13628-6-2008
- 发布日期
- 2008年01月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- E94
- 国际标准分类号
- 75.180.10
- 发布单位
- DE-DIN
- 引用标准
- ISO 4406-1999 ISO 6073 ISO 7498 ISO 9606-1 ISO 9606-2 ISO 9956 ISO 10423 ISO 10945 ISO/TR 10949 ISO 13628-4 ISO 13628-5 ISO 15607 ISO 15609-2 ISO 15610 ISO 15611 ISO 15612 ISO 15613 ISO 15614-1 ISO/TS 16431 ANSI/ASME B31.3 ASME Boiler and Pressure Vessel
- 适用范围
- This standard is applicable to design, fabrication, testing, installation and operation of subsea production control systems in the oil and natural gas exploration. It contains requirements to subsea production control systems. This part of ISO 13628 covers surface control system equipment, subsea-installed control system equipemnt and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services. Where applicable, this part of ISO 13628 can be used for equipment on multiple-well applications. This part of ISO 13628setablishes design standards for systems, subsystems, components and operating fluids in order to provide for the safe and functional control of subsea production equipment. This part of ISO 13628contains various types of information related to subsea production control systems. They are -informative data that provide an overview of the architecture and general functionality of control systems for the purpose of introduction and information ; -basic prescriptive data that shall be adhered to by all types of control system; -selective prescriptive data that are control-system-type sensitive and shall be adhered to only when they are relevant; -optional data or requirements that need be adopted only when considered necessary either by the purchaser or the vendor. In view of the diverse nature of the data provided, control system purchasers and specifiers are advised to select from this part of ISO 13628 only the provisions needed for the application at hand. Failure to adopt a selsctive approach to the provisions contained herein can lead to overspecification and higher purchase costs. Rework and repair of used equipment are beyond the scope of this part of ISO 13628.