IEC 60282-2 Edition 2.1-1997
高压熔断器.第2部分:喷射式熔断器已作废

High-voltage fuses - Part 2: Expulsion fuses

IEC 60282-2 Edition 2.1-1997 发布历史

This International Standard specifies requirements for expulsion fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz, and of rated voltages exceeding 1000 V. Expulsion fuses are fuses in which the arc is extinguished by the expulsion effects of the gases produced by the arc. Expulsion fuses are classified according to the TRV (transient recovery voltage) capability in classes A, B and C. This standard covers only the performance of fuses, each one comprising a specified combination of fuse-base, fuse-carrier, and fuse-link which have been tested in accordance with this standard; and successful performance of other combinations cannot be implied from this standard. This standard may also be used for non-expulsion fuses in which the interruption process waits for natural current zero to clear the circuit. NOTE 1 - See clause 5 and application guide for specific information regarding the selection of fuse class. NOTE 2 - Fuses required for the protection of capacitors and for transformer circuit applications are subject to additional requirements (see IEC 60549 or IEC 60787). NOTE 3 - This standard does not cover load-switching nor fault-making capabilities. Information regarding requirements related to switching capabilities may be found in IEC 60265-1. NOTE 4 - This standard does not cover aspects related to the level of noise, nor the emission of hot gases inherent to some types of expulsion fuses during the process of interruption of fault currents.

IEC 60282-2 Edition 2.1-1997由国际电工委员会 IX-IEC 发布于 1997-12，于 2008-04 废止。

IEC 60282-2 Edition 2.1-1997 在中国标准分类中归属于: K43 高压开关设备，在国际标准分类中归属于: 29.120.50 熔断器和其他过载保护装置。

IEC 60282-2 Edition 2.1-1997的历代版本如下：

• 1997年12月 IEC 60282-2 Edition 2.1-1997 高压熔断器.第2部分:喷射式熔断器

IEC 60282-2 Edition 2.1-1997 高压熔断器.第2部分:喷射式熔断器 于 2008-04 变更为 IEC 60282-2-2008 高压熔断器.第2部分:冲击式熔断器。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEC 60282-2 Edition 2.1-1997 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEC 60282-2 Edition 2.1-1997

发布日期

1997年12月

实施日期

废止日期

2008-04

中国标准分类号

K43

国际标准分类号

29.120.50

发布单位

IX-IEC

代替标准

IEC 60282-2-2008

适用范围

This International Standard specifies requirements for expulsion fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz, and of rated voltages exceeding 1000 V. Expulsion fuses are fuses in which the arc is extinguished by the expulsion effects of the gases produced by the arc. Expulsion fuses are classified according to the TRV (transient recovery voltage) capability in classes A, B and C. This standard covers only the performance of fuses, each one comprising a specified combination of fuse-base, fuse-carrier, and fuse-link which have been tested in accordance with this standard; and successful performance of other combinations cannot be implied from this standard. This standard may also be used for non-expulsion fuses in which the interruption process waits for natural current zero to clear the circuit. NOTE 1 - See clause 5 and application guide for specific information regarding the selection of fuse class. NOTE 2 - Fuses required for the protection of capacitors and for transformer circuit applications are subject to additional requirements (see IEC 60549 or IEC 60787). NOTE 3 - This standard does not cover load-switching nor fault-making capabilities. Information regarding requirements related to switching capabilities may be found in IEC 60265-1. NOTE 4 - This standard does not cover aspects related to the level of noise, nor the emission of hot gases inherent to some types of expulsion fuses during the process of interruption of fault currents.