IEC 61800-4-2002
调速电气传动系统.第4部分:一般要求.交流电压1000 V以上但不超过35 kV的交流调速电气传动系统额定值的规范
Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1000 V a.c., and not exceeding 35 kV
IEC 61800-4-2002 发布历史
This part of IEC 61800 applies to adjustable speed a.c. drive systems that include power conversion, control equipment and a motor. Excluded are traction for railway applications and electrical vehicle drives. It applies to power drive systems (see figure 1) with converter voltages (line-to-line voltage), between 1 kV a.c. and 35 kV a.c, input side 50 Hz or 60 Hz, and load side frequencies up to 600 Hz. Requirements for voltages above 15 kV are not included and are defined by agreement between the manufacturer and the system supplier. For power drive systems, with voltages above 1 kV, using a step-down input transformer and/or a step-up output transformer in connection with a low voltage converter (below 1 000 V), IEC 61800-2 applies. EMC aspects are covered in IEC 61800-3. Specific safety requirements for drive systems with voltage above 1 kV will be covered in IEC 61800-5. This standard gives the characteristics of the converters, their topologies and their relationship with the complete a.c. drive system. It also states their performance requirements with respect to ratings, normal operating conditions, overload conditions, surge withstand capabilities, stability, protection, a.c. line earthing, topologies and testing. Furthermore, it deals with application guidelines, such as control strategies, torsion analysis, recommendations for earthing and drive system component integration.
IEC 61800-4-2002由国际电工委员会 IX-IEC 发布于 2002-09。
IEC 61800-4-2002 在中国标准分类中归属于: K20 旋转电机综合，在国际标准分类中归属于: 29.160.30 电动机。
IEC 61800-4-2002 发布之时，引用了标准
- GB 755 旋转电机.定额和性能*， 2008-06-19 更新
- GB 1094.2-1996 电力变压器 第2部分; 温升
- GB/T 1993-1993 旋转电机 冷却方法
- GB/T 2900.18-1992 电工术语 低压电器
- GB/T 2900.56-2002 电工术语 自动控制
* 在 IEC 61800-4-2002 发布之后有更新，请注意新发布标准的变化。
IEC 61800-4-2002的历代版本如下：
- 2002年09月 IEC 61800-4-2002 调速电气传动系统.第4部分:一般要求.交流电压1000 V以上但不超过35 kV的交流调速电气传动系统额定值的规范
- 标准号
- IEC 61800-4-2002
- 发布日期
- 2002年09月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- K20
- 国际标准分类号
- 29.160.30
- 发布单位
- IX-IEC
- 引用标准
- GB 755 GB 1094.2-1996 GB/T 1993-1993 GB/T 2900.18-1992 GB/T 2900.56-2002
- 被代替标准
- IEC 22G/99/FDIS-2002
- 适用范围
- This part of IEC 61800 applies to adjustable speed a.c. drive systems that include power conversion, control equipment and a motor. Excluded are traction for railway applications and electrical vehicle drives. It applies to power drive systems (see figure 1) with converter voltages (line-to-line voltage), between 1 kV a.c. and 35 kV a.c, input side 50 Hz or 60 Hz, and load side frequencies up to 600 Hz. Requirements for voltages above 15 kV are not included and are defined by agreement between the manufacturer and the system supplier. For power drive systems, with voltages above 1 kV, using a step-down input transformer and/or a step-up output transformer in connection with a low voltage converter (below 1 000 V), IEC 61800-2 applies. EMC aspects are covered in IEC 61800-3. Specific safety requirements for drive systems with voltage above 1 kV will be covered in IEC 61800-5. This standard gives the characteristics of the converters, their topologies and their relationship with the complete a.c. drive system. It also states their performance requirements with respect to ratings, normal operating conditions, overload conditions, surge withstand capabilities, stability, protection, a.c. line earthing, topologies and testing. Furthermore, it deals with application guidelines, such as control strategies, torsion analysis, recommendations for earthing and drive system component integration.