SAE AMS 4339-1994
经溶液热处理、轧制或冷光拉处理的铝合金4.4Cu1.5Mg0.60Mn棒材和杆材
Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu 1.5Mg 0.60Mn Solution Heat Treated, Cold Worked, and Artificially Aged
哪些标准引用了SAE AMS 4339-1994
SAE AS 1227C-2001航空器用小于等于400°F的低压金属加固缠绕聚四氟乙烯的软管组件SAE AS 5181-200090°弯头、闷头、扩口式对软管配件SAE AS 5187-2000闷头45°弯头软管配件SAE AS 4735A-1999FSC 4730(R)型锻的自粘接固定空腔柔性无螺纹的凹套环SAE AS 3220A-2008非扩口式铝制套管配件SAE AS 5185-200090°弯头管对软管配件SAE AS 5833-2006非螺纹柔性固定空腔、载流、自粘插型锻头金属箍SAE AS 5835-2006非螺纹柔性固定空腔、载流、自粘联轴器体 SAE AS 5193A-2009内直螺纹端口交叉配件SAE AS 5186-200045°弯头管对软管配件SAE AS 5834-2006非螺纹柔性固定空腔、载流、自粘套管SAE AS 893D-2009规则位置外螺纹直口接头球座配件减径管和标准SAE AS 5838-2006非螺纹柔性固定空腔、载流、自粘合对焊接插座金属箍SAE AS 4735B-2015SAE AS 5179B-2012舱门配件螺母
- 标准号
- SAE AMS 4339-1994
- 发布日期
- 1994年03月01日
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- V11
- 国际标准分类号
- 49.025.20
- 发布单位
- US-SAE
- 代替标准
- SAE AMS 4339A-2004
- 适用范围
- This specification covers an aluminum alloy in the form of rolled or cold finished bars and rods. These products have been used typically for parts requiring higher yield strength than is afforded by naturally aged tempers of this alloy and whose fabrication does not involve welding, but usage is not limited to such applications.
谁引用了SAE AMS 4339-1994 更多引用
SAE AS 1227C-2001 航空器用小于等于400°F的低压金属加固缠绕聚四氟乙烯的软管组件
SAE AS 5181-2000 90°弯头、闷头、扩口式对软管配件
SAE AS 5187-2000 闷头45°弯头软管配件
SAE AS 4735A-1999 FSC 4730(R)型锻的自粘接固定空腔柔性无螺纹的凹套环
SAE AS 3220A-2008 非扩口式铝制套管配件
SAE AS 5185-2000 90°弯头管对软管配件
SAE AS 5833-2006 非螺纹柔性固定空腔、载流、自粘插型锻头金属箍
SAE AS 5835-2006 非螺纹柔性固定空腔、载流、自粘联轴器体
SAE AS 5193A-2009 内直螺纹端口交叉配件
SAE AS 5186-2000 45°弯头管对软管配件