JIS B 8572-1:2008
燃料油流量计.交易或鉴定中使用的测量仪表.第1部分:机动车辆用燃料分配器

Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 1: Fuel dispensers for motor vehicles


JIS B 8572-1:2008 发布历史

JIS B 8572-1:2008由日本工业标准调查会 JP-JISC 发布于 2008-04-20,并于 2008-04-21 实施。

JIS B 8572-1:2008 在中国标准分类中归属于: T39 车用仪表及测试设备,在国际标准分类中归属于: 17.040.30 测量仪器仪表,75.200 石油、石油产品和天然气储运设备。

JIS B 8572-1:2008 发布之时,引用了标准

  • JIS K 2249 原油和石油产品.基于标准温度(15℃)的密度的测定和石油测量表

JIS B 8572-1:2008的历代版本如下:

  • 2008年 JIS B 8572-1:2008 燃料油流量计.交易或鉴定中使用的测量仪表.第1部分:机动车辆用燃料分配器

 

This Standard specifies those measuring systems (fuel dispensers for mo¬tor vehicles) which have a mechanism for filling fuel tanks or other containers of motor vehicles, small boats, small airplanes, etc. with fuel oilsC) (petrol, kerosene, light fuel oil or heavy fuel oil, etc.) and which are installed in fuel delivery sites(2) to be used for transaction or certification. This Standard does not apply to systems which mea¬sure fuel oils having viscosity exceeding 0.1 Pa • s and temperature under -20 °C or above 50°C. ^ Notes (') A wide range of fuel oils such as petrol, kerosene and diesel fuel. ^'^^ (2) Fuel delivery sites mean a wide range of sites including general pur- pose delivery sites as specified by the Fire Service Law and are not limited to petrol stations. Specifically, fuel dispensers such as those for selling kerosene which are installed in such places as rice retail¬ing stores are included. NOTE : The International Standard corresponding to this Standard is as follows. In addition, the symbols which denote the degree of correspondence in the contents between JIS and the relevant International Standard are IDT (identical), MOD (modified) and NEQ (not equivalent) according to ISO/IEC Guide 21. OIML R117 :1995 Measuring systems for liquids other than water (MOD)

标准号
JIS B 8572-1:2008
发布
2008年
发布单位
日本工业标准调查会
当前最新
JIS B 8572-1:2008
 
 
引用标准
JIS K 2249 JIS Z 8013

JIS B 8572-1:2008相似标准


推荐

超声波流量计基本原理

随着工业发展及节能工作开展,煤油混合(COM)、煤水泥合(CWM)燃料输送和应用以及燃料油加水助燃等节能方法发展,都为多普勒超声波流量计应用开辟广阔前景。...

流量测量仪表应用研究意义

而应用技术研究,还包括测量对象本身,仅仅流量计本体性能好并不能保证获得要求测量效果。流量测量仪表应用技术研究目标是正确使用,主要有下面几个具体内容。(1)提高开表率  在仪表设备管理,开表率定义是:(仪表总台数一未正常使用仪表台数)/仪表总台数。因此,提高开表率就是要减少无法投入正常使用仪表。...

新标 | 国标委最新发布203项国家标准

 电感耦合等离子发射光谱法 2018-02-01 156  GB/T 34100-2017  轻质烃及发动机燃料和其他油品总硫含量测定 紫外荧光法 2018-02-01 157  GB/T 34101-2017  燃料油硫化氢含量测定 快速液相萃取法 2018-02-01 158  GB/T 34102-2017  喷气燃料中2,6-二叔丁基对甲酚含量测定 微分脉冲伏安法 2018-02-...

自控仪表跨行有多难?

例如,在油罐油液位、化工生产反应塔溶液液位等,都需要采用物位测量仪表进行测量。4)流量仪表。流量仪表,俗称为流量计流量计最重要部分是生产方法稳定性以及优化性,而流量也是生产质量考核标准之一。5)在线过程分析仪。...





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号