The Compressed Gas Association has prepared this standard as a guide for cargo tank hose users in establishing their own hose requalification procedures and standards in carbon dioxide refrigerated liquid transfer service applications. This publication is primarily written for elastomer carbon dioxide hoses, but the general inspections may be applied to hoses for other commodities. It should be understood that this is a minimum standard and may not cover all circumstances for every hose installation and lading. Each user can expect to modify this minimum standard to suit the user's own installation and conditions of service. Acceptance for continued service in accordance with these limits does not guarantee that a hose or coupling assembly is not danger~us or without the possibility of impending failure. These procedures represent the best currently available industry practice. This standard is recommended as being limited in application to hose of the following characteristics: having an inner tube of natural or synthetic elastomer using reinforcement material consisting of a ply or plies of textile fabric or yarn and/or metal wire braid and enveloped with an outer protective cover; and internal diameters from 1/4 in to 4 in (6.4 mm to 102 mm) and maximum rated working pressures from over 125 psig (860 kPa) up to and including 500 psig (3450 kPa) See CGA G-6.6, Standard for Elastomer-Type Carbon Dioxide Bulk Transfer Hose, for additional information concerning construction of hoses to which this standard applies [5]. Standards for the requalification of Iow pressure hose having 125 psig (860 kPa) and lower maximum rated working pressures used in services such as the transfer of flammable liquids and combustible liquids should be obtained from the appropriate standards sources. In add tion, cryogenic liquids and certain compressed gases such as chlorine require the use of metal hose or hose with metal liners, and users should refer to the specified industry standards or to the manufacturers of such hose with regard to recommendations for reinspection and retesting procedures.
CGA P-7-2007由美国压缩气体协会 US-CGA 发布于 2007。
CGA P-7-2007 在中国标准分类中归属于: G42 胶管、胶带、胶布。
* 在 CGA P-7-2007 发布之后有更新,请注意新发布标准的变化。
非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 CGA P-7-2007 前三页,或者稍后再访问。
点击下载后,生成下载文件时间比较长,请耐心等待......
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号