BS 8422-2003
力的测量.应变仪负荷传感器系统.校准方法

Force measurement - Strain gauge load cell systems - Calibration method

BS 8422-2003 发布历史

This British Standard describes a method of calibration for strain gauge load cell systems for use in various industrial weighing and force measurement applications. NOTE The technical procedures covered in this British Standard are split into one "standard calibration" (Clause 7), which determines the basic response of the system in terms of non-linearity and reproducibility, and a number of "supplementary calibrations" (Clause 8 to Clause 22), each of which determines the response of the system to one specific input factor. It is envisaged that load cell systems calibrated in accordance with this standard will normally undergo the standard calibration, possibly together with a number of supplementary calibrations, but a system may also be calibrated solely in accordance with one or more of the supplementary calibrations.

BS 8422-2003由英国标准学会 GB-BSI 发布于 2003-10-31，并于 2003-10-31 实施。

BS 8422-2003 在中国标准分类中归属于: N13 机械量仪表、自动秤重装置与其他检测仪表，在国际标准分类中归属于: 17.100 力、重力和压力的测量,19.060 机械试验。

BS 8422-2003的历代版本如下：

• 2003年10月31日 BS 8422-2003 力的测量.应变仪负荷传感器系统.校准方法

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS 8422-2003 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS 8422-2003

发布日期

2003年10月31日

实施日期

2003年10月31日

废止日期

无

中国标准分类号

N13

国际标准分类号

17.100;19.060

发布单位

GB-BSI

被代替标准

03/309174 DC-2003

适用范围

This British Standard describes a method of calibration for strain gauge load cell systems for use in various industrial weighing and force measurement applications. NOTE The technical procedures covered in this British Standard are split into one "standard calibration" (Clause 7), which determines the basic response of the system in terms of non-linearity and reproducibility, and a number of "supplementary calibrations" (Clause 8 to Clause 22), each of which determines the response of the system to one specific input factor. It is envisaged that load cell systems calibrated in accordance with this standard will normally undergo the standard calibration, possibly together with a number of supplementary calibrations, but a system may also be calibrated solely in accordance with one or more of the supplementary calibrations.