SAE AMS 5401C-2004
UNS N26625经真空融化和真空实型铸造的62Ni-21.5Cr-9.0Mo-3.6Cb(Nb)耐蚀和耐热镍合金熔模铸件

Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As Cast UNS N26625

SAE AMS 5401C-2004 发布历史

This specification covers a corrosion and heat-resistant, vacuum melted, nickel alloy in the formof investment castings.These castings have been used typically for structural parts requiring high strength up to1600 °F (871 °C) and oxidation and corrosion resistance up to 1800 °F (982 °C), butusage is not limited to such applications.Castings conforming to this specification are classified as follows:Class 1 - Trace element limits conforming to AMS 2280, Class 1 (AMS 2280-1)Class 2 - Trace element limits conforming to AMS 2280, Class 2 (AMS 2280-2)Class 3 - Trace element limits do not apply.Castings shall conform to Class 1 unless Class 2 or Class 3 is specified by purchaser.

SAE AMS 5401C-2004由美国机动车工程师协会 US-SAE 发布于 2004-05-01。

SAE AMS 5401C-2004 在中国标准分类中归属于: V11 航空与航天用金属铸锻材料，在国际标准分类中归属于: 49.025.99 其他材料。

SAE AMS 5401C-2004 发布之时，引用了标准

• SAE AMS 2175-2003 
• SAE AMS 2269E-1994 化学检验分析限值,镍,镍合金和钴合金
• SAE AMS 2280A-1992 痕量元素控制,镍合金铸造
• SAE AMS 2360C-2001 
• SAE AMS 2694A-1984 航空航天铸件的补焊
• SAE AMS 2804C-2001 标识铸件

SAE AMS 5401C-2004的历代版本如下：

• 2004年05月01日 SAE AMS 5401C-2004 UNS N26625经真空融化和真空实型铸造的62Ni-21.5Cr-9.0Mo-3.6Cb(Nb)耐蚀和耐热镍合金熔模铸件

SAE AMS 5401C-2004 UNS N26625经真空融化和真空实型铸造的62Ni-21.5Cr-9.0Mo-3.6Cb(Nb)耐蚀和耐热镍合金熔模铸件 由 SAE AMS 5401B-1996 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE AMS 5401C-2004 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE AMS 5401C-2004

发布日期

2004年05月01日

实施日期

废止日期

无

中国标准分类号

V11

国际标准分类号

49.025.99

发布单位

US-SAE

引用标准

ASTM E 8-2004 ASTM E 8M-2004 ASTM E 354-1993 ASTM E 1417-1999 ASTM E 1742-2000 SAE AMS 2175-2003 SAE AMS 2269E-1994 SAE AMS 2280A-1992 SAE AMS 2360C-2001 SAE AMS 2694A-1984 SAE AMS 2804C-2001

被代替标准

SAE AMS 5401B-1996

适用范围

This specification covers a corrosion and heat-resistant, vacuum melted, nickel alloy in the formof investment castings.These castings have been used typically for structural parts requiring high strength up to1600 °F (871 °C) and oxidation and corrosion resistance up to 1800 °F (982 °C), butusage is not limited to such applications.Castings conforming to this specification are classified as follows:Class 1 - Trace element limits conforming to AMS 2280, Class 1 (AMS 2280-1)Class 2 - Trace element limits conforming to AMS 2280, Class 2 (AMS 2280-2)Class 3 - Trace element limits do not apply.Castings shall conform to Class 1 unless Class 2 or Class 3 is specified by purchaser.