JIS B8342-2008
小型往复式空气压缩机
Small-size reciprocating air compressors
JIS B8342-2008 发布历史
This Japanese Industrial Standard specifies the feed-oil type or non-feed-oil type single-acting air-cooled single-stage reciprocating air compressors having the maximum pressure of 0.2 MPa to 1.0 MPa and the single-acting air-cooled two-stage reciprocat- ing air compressors having the maximum pressure of 0.7 MPa to 1.4 MPa, actuated with electric motors with a rated output of not more than 11 kW or internal combustion en- gines equivalent thereto, which can be used as the compressor main body by itself or as mounted on an air tank, or as housed in a soundproof cover, to be used as various types of air-supply source (hereafter referred to as "compressors"). The gas handled in the compressors shall be air having a temperature of-5 ~C to 40 ~C at the atmosphere. The case where antifreezing measures are particularly re- quired because of the temperature 0 ~C or lower shall be subject to the agreement between the parties concerned. NOTE : The maximum pressure refers to the pressure under which the automatic start-stop apparatus (pressure switch), the capacity control apparatus (automatic unloader) or the electronic control device actuates.
JIS B8342-2008由日本工业标准调查会 JP-JISC 发布于 2008-06-20，并于 2008-06-20 实施。
JIS B8342-2008 在中国标准分类中归属于: J72 压缩机、风机，在国际标准分类中归属于: 23.140 压缩机和气动机械。
JIS B8342-2008 发布之时，引用了标准
- JIS B0202 圆柱管螺纹
- JIS B0203 锥管螺纹
- JIS B0601 产品几何技术规范(GPS).表面纹理:剖面法.术语,定义和表面纹理参数*， 2013-03-21 更新
- JIS B1176 内六角凹头螺钉*， 2014-04-21 更新
- JIS B1180 六角头螺栓和螺钉*， 2014-04-21 更新
- JIS B1181 六角螺母和六角薄螺母*， 2014-04-21 更新
- JIS B1183 六角盖形螺母*， 2010-09-21 更新
- JIS B1521 滚动轴承.深槽滚珠轴承*， 2012-05-21 更新
- JIS B1522 滚动轴承.角面接触滚球轴承*， 2012-05-21 更新
- JIS B1523 滚动轴承.自位滚珠轴承*， 2012-05-21 更新
- JIS B1533 滚动轴承.圆柱滚柱轴承*， 2013-11-20 更新
- JIS B1534 滚动轴承.圆锥滚柱轴承*， 2013-11-20 更新
- JIS B1536 滚动轴承. 滚针轴承的边界尺寸,产品几何技术规范(GPS)和公差值. 第5部分: 支重轮*， 2021-02-22 更新
- JIS B7505 无液压力计.第3部分:交易或认证用电子测量仪表*， 2008-12-20 更新
- JIS B8032 内燃机.小直径活塞环.第9部分:铸铁制楔形环*， 2018-01-22 更新
- JIS B8265 压力容器的建造.一般原则*， 2017-11-25 更新
- JIS B8341 容积式压缩机.验收试验
- JIS C4203 一般用途的单相感应电动机
- JIS C4210 一般用途的低压三相鼠笼式感应电动机
- JIS G3101 普通结构用轧制钢*， 2020-12-21 更新
- JIS G3311 冷轧特殊带钢*， 2021-04-20 更新
- JIS G3452 普通管道系统用碳素钢管*， 2019-06-20 更新
- JIS G3522 钢琴丝材*， 2014-02-20 更新
- JIS G4051 机械结构用碳素钢*， 2016-11-21 更新
- JIS G4053 机器结构用低合金钢*， 2016-11-21 更新
* 在 JIS B8342-2008 发布之后有更新，请注意新发布标准的变化。
JIS B8342-2008的历代版本如下：
- 1986年02月01日 JIS B8342-1986 小型往复式空气压缩机
- 2008年06月20日 JIS B8342-2008 小型往复式空气压缩机
- 标准号
- JIS B8342-2008
- 发布日期
- 2008年06月20日
- 实施日期
- 2008年06月20日
- 废止日期
- 无
- 中国标准分类号
- J72
- 国际标准分类号
- 23.140
- 发布单位
- JP-JISC
- 引用标准
- JIS B0202 JIS B0203 JIS B0601 JIS B1176 JIS B1180 JIS B1181 JIS B1183 JIS B1521 JIS B1522 JIS B1523 JIS B1533 JIS B1534 JIS B1536 JIS B7505 JIS B8032 JIS B8265 JIS B8341 JIS C4203 JIS C4210 JIS G3101 JIS G3311 JIS G3452 JIS G3522 JIS G4051 JIS G4053 JIS G
- 被代替标准
- JIS B8342-1986
- 适用范围
- This Japanese Industrial Standard specifies the feed-oil type or non-feed-oil type single-acting air-cooled single-stage reciprocating air compressors having the maximum pressure of 0.2 MPa to 1.0 MPa and the single-acting air-cooled two-stage reciprocat- ing air compressors having the maximum pressure of 0.7 MPa to 1.4 MPa, actuated with electric motors with a rated output of not more than 11 kW or internal combustion en- gines equivalent thereto, which can be used as the compressor main body by itself or as mounted on an air tank, or as housed in a soundproof cover, to be used as various types of air-supply source (hereafter referred to as "compressors"). The gas handled in the compressors shall be air having a temperature of-5 ~C to 40 ~C at the atmosphere. The case where antifreezing measures are particularly re- quired because of the temperature 0 ~C or lower shall be subject to the agreement between the parties concerned. NOTE : The maximum pressure refers to the pressure under which the automatic start-stop apparatus (pressure switch), the capacity control apparatus (automatic unloader) or the electronic control device actuates.