IEC 61109-2008
架空线路用绝缘子.标称电压大于1000V的交流架空线路用复合绝缘子和耐张绝缘子.定义、试验方法和验收准则
Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria
IEC 61109-2008 发布历史
This International Standard applies to composite suspension/tension insulators consisting of a load-bearing cylindrical insulating solid core consisting of fibres - usually glass - in a resin- based matrix, a housing (outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core. Composite insulators covered by this standard are intended for use as suspension/tension line insulators, but it should be noted that these insulators can occasionally be subjected to compression or bending, for example when used as phase-spacers. This standard can be applied in part to hybrid composite insulators where the core is made of a homogeneous material (porcelain, resin), see Clause 8. The object of this standard is to - define the terms used, - prescribe test methods, - prescribe acceptance criteria. This standard does not include requirements dealing with the choice of insulators for specific operating conditions.
IEC 61109-2008由国际电工委员会 IX-IEC 发布于 2008-05。
IEC 61109-2008 在中国标准分类中归属于: K48 绝缘子，在国际标准分类中归属于: 29.080.10 绝缘子。
IEC 61109-2008 发布之时，引用了标准
- IEC 60383-1 标称电压1000V以上的架空线路用绝缘子 第1部分:交流系统用陶瓷或玻璃绝缘子单元 定义、试验方法和验收准则
- IEC 60383-2 标称电压1000V以上的架空线路用绝缘子 第2部分:交流系统用绝缘子串和绝缘子组 定义、试验方法和验收准则
- IEC 61466-1 额定电压大于1000 V的架空线的复合串绝缘子单元 - 第1部分:标准强度和端接头*， 2016-05-18 更新
- IEC 62217-2005 标称电压
1000V的室内外用聚合物绝缘子.一般定义、试验方法和验收标准 - ISO 3452 无损检测——渗透检测第6部分:低于10℃的渗透检测*， 2008-11-20 更新
* 在 IEC 61109-2008 发布之后有更新，请注意新发布标准的变化。
IEC 61109-2008的历代版本如下：
- 1992年03月 IEC 61109-1992 标称电压大于1000V的交流架空线路用复合绝缘子 定义、试验方法和验收准则
- 2008年05月 IEC 61109-2008 架空线路用绝缘子.标称电压大于1000V的交流架空线路用复合绝缘子和耐张绝缘子.定义、试验方法和验收准则
- 标准号
- IEC 61109-2008
- 发布日期
- 2008年05月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- K48
- 国际标准分类号
- 29.080.10
- 发布单位
- IX-IEC
- 引用标准
- IEC 60383-1 IEC 60383-2 IEC 61466-1 IEC 62217-2005 ISO 3452
- 被代替标准
- IEC 36B/274/FDIS-2008 IEC 61109-1992 IEC 61109 AMD 1-1995
- 适用范围
- This International Standard applies to composite suspension/tension insulators consisting of a load-bearing cylindrical insulating solid core consisting of fibres - usually glass - in a resin- based matrix, a housing (outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core. Composite insulators covered by this standard are intended for use as suspension/tension line insulators, but it should be noted that these insulators can occasionally be subjected to compression or bending, for example when used as phase-spacers. This standard can be applied in part to hybrid composite insulators where the core is made of a homogeneous material (porcelain, resin), see Clause 8. The object of this standard is to - define the terms used, - prescribe test methods, - prescribe acceptance criteria. This standard does not include requirements dealing with the choice of insulators for specific operating conditions.