ASTM D3295-1997
聚四氟乙烯管、微型卷边和螺旋切割管的标准规范

Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

ASTM D3295-1997 发布历史

1.1 This specification covers PTFE tubing, miniature beading and spiral cut tubing-manufactured from PTFE resin produced from dispersion specified in Specification D 4895.

Note 18212;PTFE tube and rod manufactured from resin specified in Specification D 4894 are covered in Specification D 1710.

1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.3 The following hazard caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 As PTFE resin produced from dispersion is not a true thermoplastic material, any reuse for the specification referenced above is impossible. However, markets do exist for non-virgin PTFE as additives and fillers.

Note 28212;There is currently no published ISO standard relating to this specification.

ASTM D3295-1997由美国材料与试验协会 US-ASTM 发布于 1997。

ASTM D3295-1997 在中国标准分类中归属于: G33 塑料型材。

ASTM D3295-1997的历代版本如下：

• 2001年11月10日 ASTM D3295-01 PTFE管 微型珠粒和螺旋切割管的标准规格
• 2006年04月01日 ASTM D3295-06 PTFE管 微型珠粒和螺旋切割管的标准规格
• 2011年02月01日 ASTM D3295-06(2011) PTFE管 微型珠粒和螺旋切割管的标准规格
• 2015年09月01日 ASTM D3295-15 PTFE管 微型珠粒和螺旋切割管的标准规格
• 1997年 ASTM D3295-1997 聚四氟乙烯管、微型卷边和螺旋切割管的标准规范
• 2020年12月01日 ASTM D3295-20 PTFE管 微型珠粒和螺旋切割管的标准规格
• 2001年 ASTM D3295-2001 聚四氟乙烯管、微型卷边和螺旋切割管的标准规范
• 2006年 ASTM D3295-2006 聚四氟乙烯管、微型卷边和螺旋切割管的标准规范
• 2006年 ASTM D3295-2006(2011) 聚四氟乙烯管,微型轴承和螺旋状掏槽管的标准规范
• 2015年 ASTM D3295-2015 PTFE管, 微型卷边和螺旋切割管的标准规格
• 2001年11月10日 ASTM D3295-97 PTFE管 微型珠粒和螺旋切割管的标准规格

 

 

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM D3295-1997 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

 

---

---

标准号

ASTM D3295-1997

发布日期

1997年

实施日期

废止日期

无

中国标准分类号

G33

国际标准分类号

23.040.20 (Plastic pipes)

发布单位

US-ASTM

适用范围

1.1 This specification covers PTFE tubing, miniature beading and spiral cut tubing-manufactured from PTFE resin produced from dispersion specified in Specification D 4895.

Note 18212;PTFE tube and rod manufactured from resin specified in Specification D 4894 are covered in Specification D 1710.

1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.3 The following hazard caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 As PTFE resin produced from dispersion is not a true thermoplastic material, any reuse for the specification referenced above is impossible. However, markets do exist for non-virgin PTFE as additives and fillers.

Note 28212;There is currently no published ISO standard relating to this specification.