ASTM D5628-1996
用下落投掷法测试平板刚性塑料样品的抗冲击性的标准试验方法(冲击锤或下落块)

Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

ASTM D5628-1996 发布历史

1.1 This test method covers the determination of the relative ranking of materials according to the energy required to crack or break flat, rigid plastic specimens under various specified conditions of impact of a free-falling dart (tup).

1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8.

Note 18212;This test method and ISO 6603-1-1985 are technically equivalent only when the test conditions and specimen geometry required for Geometry FE and the Bruceton Staircase method of calculation are used.

ASTM D5628-1996由美国材料与试验协会 US-ASTM 发布于 1996。

ASTM D5628-1996 在中国标准分类中归属于: G34 合成橡胶基础标准与通用方法。

ASTM D5628-1996的历代版本如下：

• 2006年09月01日 ASTM D5628-06 标准测试方法通过落镖（Tup或Falling Mass）测量扁平硬质塑料样品的抗冲击性
• 2007年03月01日 ASTM D5628-07 标准测试方法通过落镖（Tup或Falling Mass）测量扁平硬质塑料样品的抗冲击性
• 2010年07月01日 ASTM D5628-10 标准测试方法通过落镖（Tup或Falling Mass）测量扁平硬质塑料样品的抗冲击性
• 2018年05月01日 ASTM D5628-18 标准测试方法通过落镖（Tup或Falling Mass）测量扁平硬质塑料样品的抗冲击性
• 1996年 ASTM D5628-1996 用下落投掷法测试平板刚性塑料样品的抗冲击性的标准试验方法(冲击锤或下落块)
• 1996年 ASTM D5628-1996(2001)e1 用下落投掷法测试平板刚性塑料样品的抗冲击性的标准试验方法(冲击锤或下落块)
• 2006年 ASTM D5628-2006 用下落投掷法测试平板刚性塑料样品抗冲击性的标准试验方法(冲击锤或下落块)
• 2007年 ASTM D5628-2007 用下落投掷法(冲击锤或下落块)测试平板刚性塑料样品抗冲击性的标准试验方法
• 2010年 ASTM D5628-2010 用下落投掷法(冲击锤或下落块)测试扁平硬质塑料试样抗冲击性的标准试验方法
• 1996年03月10日 ASTM D5628-96 标准测试方法通过落镖（Tup或Falling Mass）测量扁平硬质塑料样品的抗冲击性
• 1996年03月10日 ASTM D5628-96(2001)e1 标准测试方法通过落镖（Tup或Falling Mass）测量扁平硬质塑料样品的抗冲击性

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM D5628-1996 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ASTM D5628-1996

发布日期

1996年

实施日期

废止日期

无

中国标准分类号

G34

发布单位

US-ASTM

适用范围

1.1 This test method covers the determination of the relative ranking of materials according to the energy required to crack or break flat, rigid plastic specimens under various specified conditions of impact of a free-falling dart (tup).

1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8.

Note 18212;This test method and ISO 6603-1-1985 are technically equivalent only when the test conditions and specimen geometry required for Geometry FE and the Bruceton Staircase method of calculation are used.