ASTM E1413-2006
用净空动态浓缩法分离和浓缩火灾残渣样品中可燃液体残留物的标准实施规程

Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration

ASTM E1413-2006 发布历史

1.1 This practice describes the procedure for separation of small quantities of ignitable liquid residues from fire debris samples using the absorption/elution method of headspace concentration.

1.2 Both positive and negative pressure systems are described.

1.3 While this practice is suitable for successfully extracting ignitable liquid residues over the entire range of concentration, the headspace concentration methods are best used when a high level of sensitivity is required due to a very low concentration of ignitable liquid residues in the sample.

1.4 Alternate separation and concentration procedures are listed in Section 2.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM E1413-2006由美国材料与试验协会 US-ASTM 发布于 2006。

ASTM E1413-2006 在中国标准分类中归属于: C80 消防综合。

ASTM E1413-2006的历代版本如下：

• 2000年11月10日 ASTM E1413-00 用动态顶空浓度分离和浓缩火灾碎片样品中可燃液体残留物的标准实施规程
• 2005年05月01日 ASTM E1413-00(2005) 用动态顶空浓度分离和浓缩火灾碎片样品中可燃液体残留物的标准实施规程
• 2006年06月01日 ASTM E1413-06 用动态顶空浓度分离和浓缩火灾碎片样品中可燃液体残留物的标准实施规程
• 2007年04月15日 ASTM E1413-07 用动态顶空浓度分离和浓缩火灾碎片样品中可燃液体残留物的标准实施规程
• 2013年08月15日 ASTM E1413-13 通过动态顶空浓缩从火灾碎片样品中分离可燃液体残留物的标准做法
• 2019年06月01日 ASTM E1413-19 用吸附管上的动态顶空浓度从燃烧碎片样品中分离可燃液体残留物的标准实施规程
• 2000年 ASTM E1413-2000
• 2000年 ASTM E1413-2000(2005)
• 2006年 ASTM E1413-2006 用净空动态浓缩法分离和浓缩火灾残渣样品中可燃液体残留物的标准实施规程
• 2007年 ASTM E1413-2007 用动态顶部空间浓缩法测定燃烧残骸试样中可燃性液态残渣的分离和浓度的标准实施规程
• 2013年 ASTM E1413-2013 采用动态顶部空间浓缩法对燃烧残骸试样中可燃性液体残留物进行分离的标准实施规程

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM E1413-2006 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ASTM E1413-2006

发布日期

2006年

实施日期

废止日期

无

中国标准分类号

C80

国际标准分类号

13.220.99 (Other standards related to fire protect

发布单位

US-ASTM

适用范围

1.1 This practice describes the procedure for separation of small quantities of ignitable liquid residues from fire debris samples using the absorption/elution method of headspace concentration.

1.2 Both positive and negative pressure systems are described.

1.3 While this practice is suitable for successfully extracting ignitable liquid residues over the entire range of concentration, the headspace concentration methods are best used when a high level of sensitivity is required due to a very low concentration of ignitable liquid residues in the sample.

1.4 Alternate separation and concentration procedures are listed in Section 2.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM E1413-2006 中可能用到的仪器设备