DIN EN ISO 16701-2008
金属和合金的腐蚀.人工环境中的腐蚀.包括暴露在盐溶液湿度循环和间歇喷雾控制条件下的加速腐蚀试验

Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003); German version EN ISO 16701:

DIN EN ISO 16701-2008 发布历史

This International Standard defines an accelerated corrosion test method to be used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or road de-icing salt. This International Standard specifies the test apparatus and test procedure to be used in conducting the accelerated corrosion test to simulate, in a very controlled way, atmospheric corrosion conditions. In this International Standard, the term "metal" includes metallic materials with or without corrosion protection. The accelerated laboratory corrosion test applies to -- metals and their alloys; -- metallic coatings (anodic and cathodic); -- chemical conversion coatings; -- organic coatings on metals. The method is especially suitable for comparative testing in the optimization of surface treatment systems.

DIN EN ISO 16701-2008由德国标准化学会 DE-DIN 发布于 2008-08。

DIN EN ISO 16701-2008 在中国标准分类中归属于: H25 金属化学性能试验方法。

DIN EN ISO 16701-2008 发布之时，引用了标准

• ISO 4628-1 涂料和清漆. 涂层老化评估. 缺陷数量和大小以及外观均匀变化程度命名. 第1部分: 通用介绍和命名系统
• ISO 4628-2 涂料和清漆. 涂层老化评估. 缺陷数量和大小以及外观均匀变化程度命名. 第2部分: 起泡程度评定
• ISO 4628-4 涂料和清漆. 涂层老化评估. 缺陷数量和大小以及外观均匀变化程度命名. 第4部分: 开裂程度评定
• ISO 4628-5 涂料和清漆. 涂层老化评估. 缺陷数量和大小以及外观均匀变化程度命名. 第5部分: 剥落程度评定
• ISO 8407 ISO 8407-2021
• ISO 10289 金属制件上金属和其他无机覆盖层 经腐蚀试验的试验试样和制件的评级

DIN EN ISO 16701-2008的历代版本如下：

• 2008年08月 DIN EN ISO 16701-2008 金属和合金的腐蚀.人工环境中的腐蚀.包括暴露在盐溶液湿度循环和间歇喷雾控制条件下的加速腐蚀试验
• 2015年10月 DIN EN ISO 16701-2015 金属和合金的腐蚀.人工环境中的腐蚀.包括暴露在盐溶液湿度循环和间歇喷雾控制条件下的加速腐蚀试验(ISO 16701-2015);德文版本EN ISO 16701-2015

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN ISO 16701-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN ISO 16701-2008

发布日期

2008年08月

实施日期

废止日期

无

中国标准分类号

H25

发布单位

DE-DIN

引用标准

ISO 4628-1 ISO 4628-2 ISO 4628-4 ISO 4628-5 ISO 8407 ISO 10289

代替标准

DIN EN ISO 16701-2015

被代替标准

DIN EN ISO 16701-2007

适用范围

This International Standard defines an accelerated corrosion test method to be used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or road de-icing salt. This International Standard specifies the test apparatus and test procedure to be used in conducting the accelerated corrosion test to simulate, in a very controlled way, atmospheric corrosion conditions. In this International Standard, the term "metal" includes metallic materials with or without corrosion protection. The accelerated laboratory corrosion test applies to -- metals and their alloys; -- metallic coatings (anodic and cathodic); -- chemical conversion coatings; -- organic coatings on metals. The method is especially suitable for comparative testing in the optimization of surface treatment systems.