ISO/TR 11146-3:2004
激光和激光相关设备.激光束宽度、发散角度和束扩散率.第3部分:内在和几何激光束分类、扩散和试验方法细节
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
ISO/TR 11146-3:2004 发布历史
This part of ISO 11146 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams in support of ISO 11146-1. It provides the theoretical description of laser beam characterization based on the second-order moments of the Wigner distribution, including geometrical and intrinsic beam characterization, and offers important details for proper background subtraction methods recommendable for matrix detectors such as CCD cameras. It also presents alternative methods for the characterization of stigmatic or simple astigmatic beams that are applicable where matrix detectors are unavailable or deliver unsatisfying results.
ISO/TR 11146-3:2004由国际标准化组织 IX-ISO 发布于 2004-02。
ISO/TR 11146-3:2004 在中国标准分类中归属于: L51 激光器件，在国际标准分类中归属于: 31.260 光电子学、激光设备。
ISO/TR 11146-3:2004的历代版本如下：
- 2004年02月 ISO/TR 11146-3:2004 激光和激光相关设备.激光束宽度、发散角度和束扩散率.第3部分:内在和几何激光束分类、扩散和试验方法细节
ISO/TR 11146-3:2004 激光和激光相关设备.激光束宽度、发散角度和束扩散率.第3部分:内在和几何激光束分类、扩散和试验方法细节 由 ISO 11146:1999 变更而来。
- 标准号
- ISO/TR 11146-3:2004
- 发布日期
- 2004年02月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- L51
- 国际标准分类号
- 31.260
- 发布单位
- 国际标准化组织
- 被代替标准
- ISO 11146:1999
- 适用范围
- This part of ISO 11146 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams in support of ISO 11146-1. It provides the theoretical description of laser beam characterization based on the second-order moments of the Wigner distribution, including geometrical and intrinsic beam characterization, and offers important details for proper background subtraction methods recommendable for matrix detectors such as CCD cameras. It also presents alternative methods for the characterization of stigmatic or simple astigmatic beams that are applicable where matrix detectors are unavailable or deliver unsatisfying results.
ISO/TR 11146-3:2004相似标准
推荐
激光必备小知识
在推荐电压范围的低端运行激光模块也将有助于延长激光的寿命。 激光发散角指定光束在一定距离内的散布量。我们所有的光束发散规格均为全角度值。电磁束的束发散度是束直径或半径随距发出电磁束的光学孔径或天线孔径的距离而增加的角度度量。该术语仅在“远场”中有用，远离光束的任何焦点。然而，实际上，取决于孔径直径和工作波长，远场可以在物理上接近辐射孔径开始。 ...
ZAP-IT激光校准纸
主要特性（1）符合行业标准的热感纸（2）记录脉冲激光的光束、发散、模式和强度特性（3）适用于从UV到IR的宽带源使用ZAP-IT®激光校准纸记录激光束特征光束形状模式强度发散能量分配ZAP-IT®激光校准纸特性脉冲宽度范围：1 ns至30 ms能量水平范围：5 mJ /cm²至20 J /cm²在紫外线到红外线的广谱范围内敏感。...