BS ISO 15169-2003
石油和液态石油产品.使用混合罐测量系统测定立式圆筒状油罐中烃类的体积、密度和质量

Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems

BS ISO 15169-2003 发布历史

This International Standard gives guidance on the selection, installation, commissioning, calibration and verification of hybrid tank measurement systems (HTMS) for the measurement of level, static mass, observed and standard volume, and observed and reference density in tanks storing petroleum and petroleum products in fiscal or custody transfer application. As it is a matter for the user to decide which measurements (i.e. volume, or mass or both) are used for custody transfer purposes, this International Standard includes an uncertainty analysis, with examples, to enable users to select the correct components of an HTMS to address the intended application. This International Standard is applicable to stationary, vertical cylindrical tanks storing liquid hydrocarbons with a Reid Vapour Pressure (RVP) below 103,42 kPa. This International Standard is not applicable to pressurized tanks or marine applications. NOTE 1 The term "mass" is used to indicate mass in vacuum (true mass). In the petroleum industry, it is not uncommon to use apparent mass (in air) for commercial transactions. Guidance is provided on the calculation of both mass and apparent mass in air (see Annex A). NOTE 2 The calculation procedures in this International Standard can also be applied to tanks with other geometries, which have been calibrated by a recognized oil-industry method (e.g. ISO 7507). Examples of uncertainty analysis for spherical and horizontal cylindrical tanks are given in Annex B.

BS ISO 15169-2003由英国标准学会 GB-BSI 发布于 2004-02-13，并于 2004-02-13 实施。

BS ISO 15169-2003 在中国标准分类中归属于: E98 油、气集输设备，在国际标准分类中归属于: 75.180.30 容积设备和容积测量。

BS ISO 15169-2003的历代版本如下：

• 2004年02月13日 BS ISO 15169-2003 石油和液态石油产品.使用混合罐测量系统测定立式圆筒状油罐中烃类的体积、密度和质量

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS ISO 15169-2003 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS ISO 15169-2003

发布日期

2004年02月13日

实施日期

2004年02月13日

废止日期

无

中国标准分类号

E98

国际标准分类号

75.180.30

发布单位

GB-BSI

被代替标准

01/124457 DC-2001

适用范围

This International Standard gives guidance on the selection, installation, commissioning, calibration and verification of hybrid tank measurement systems (HTMS) for the measurement of level, static mass, observed and standard volume, and observed and reference density in tanks storing petroleum and petroleum products in fiscal or custody transfer application. As it is a matter for the user to decide which measurements (i.e. volume, or mass or both) are used for custody transfer purposes, this International Standard includes an uncertainty analysis, with examples, to enable users to select the correct components of an HTMS to address the intended application. This International Standard is applicable to stationary, vertical cylindrical tanks storing liquid hydrocarbons with a Reid Vapour Pressure (RVP) below 103,42 kPa. This International Standard is not applicable to pressurized tanks or marine applications. NOTE 1 The term "mass" is used to indicate mass in vacuum (true mass). In the petroleum industry, it is not uncommon to use apparent mass (in air) for commercial transactions. Guidance is provided on the calculation of both mass and apparent mass in air (see Annex A). NOTE 2 The calculation procedures in this International Standard can also be applied to tanks with other geometries, which have been calibrated by a recognized oil-industry method (e.g. ISO 7507). Examples of uncertainty analysis for spherical and horizontal cylindrical tanks are given in Annex B.