DIN ISO 16000-8-2008
室内空气.第8部分:建筑物特性通风条件下局部空气存留时间的测定(ISO 16000-8-2007)

Indoor air - Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions (ISO 16000-8:2007)


 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 DIN ISO 16000-8-2008 前三页,或者稍后再访问。

如果您需要购买此标准的全文,请联系:

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
DIN ISO 16000-8-2008
发布日期
2008年12月
实施日期
废止日期
中国标准分类号
Z15
国际标准分类号
13.040.20
发布单位
DE-DIN
引用标准
ISO 12569 Guide to the expression of uncertainty in measurement (GUM),BIPM, IEC, IFCC, ISO, IUPAC, IUPAP, OIML,1993
被代替标准
DIN ISO 16000-8-2005
适用范围
This part of ISO 16000 describes the use of single tracer gas for determining the local mean age of air as an indicator of ventilation conditions in a building. The procedures include concentration decay and homogeneous constant emission. The described methods are intended for air quality studies and can be used for a) checking whether the building ventilation requirements are met, b) estimating the adequacy of ventilation in buildings with indoor air quality problems, and c) characterizing the strength and distribution of indoor emission sources. In principle, the methods can be applied to all indoor spaces, regardless of the type of ventilation used and the state of mixing of air between zones. The prevailing ventilation conditions need not be disturbed by the measurement. This part of ISO 16000 does not address the details of the analytical methods for tracer gases. The availability of such analysis services should be checked before planning actual field measurements.

DIN ISO 16000-8-2008系列标准

DIN ISO 16000-13-2010 室内空气.第13部分:总(气体和颗粒相)多氯二恶英类多氯联苯(PCBs)和多氯代二苯并二恶英/多氯代二苯并呋喃(PCDDs/PCDFs)的测定.后部装有吸收剂的过滤器收集 DIN ISO 16000-14-2012 室内空气.第14部分:总(气体和颗粒相)二恶英类多氯联苯(PCBs)和多氯二苯对二氧(杂)芑/二苯并呋喃(PCDDs/PCDFs).通过高分辨率的气相色谱分析的抽取,清洁和分析 DIN ISO 16000-16-2009 室内空气.第16部分:真菌的检查和计算.筛选取样(ISO 16000-16:2008) DIN ISO 16000-17-2010 室内空气.第17部分:霉菌的测定与计算.培养基方法(ISO 16000-17-2008) DIN ISO 16000-18-2012 室内空气.第18部分:霉菌检测和计数.冲击采样(ISO 16000-18-2011) DIN ISO 16000-19-2012 室内空气. 第19部分:霉菌取样策略 (ISO 16000-19-2012) DIN ISO 16000-20-2015 室内空气. 第20部分: 霉菌的检测和计数. 总孢子计数的测定(ISO 16000-20-2014) DIN ISO 16000-21-2014 室内空气. 第21部分:霉菌的检测与枚举. 从材料中取样 (ISO 16000-21-2013) DIN ISO 16000-24-2013 室内空气.第24部分:吸附在建筑材料中的挥发性有机化合物(除甲醛外)浓度的减少评估用特性试验(ISO 16000-24-2009) DIN ISO 16000-25-2012 室内空气.第25部分:建筑产品半挥发性有机化合物的排放测定.微室法 (ISO 16000-25-2011) DIN ISO 16000-27-2014 室内空气. 第27部分: 采用SEM (扫描电子显微镜检查法) (直接方法) 对表面纤维落尘的测定 (ISO 16000-27-2014) DIN ISO 16000-28-2021 室内空气. 第28部分: 使用试验室对建筑产品气味排放的测定(ISO 16000-28-2020) DIN ISO 16000-29-2015 室内空气. 第29部分: VOC探测器的试验方法 (ISO 16000-29-2014) DIN ISO 16000-3-2013 室内空气.第3部分:室内空气和试验室空气中甲醛和其它羰基化合物含量的测定.主动抽样法(ISO 16000-3-2011) DIN ISO 16000-30-2015 室内空气.第30部分:室内空气的感官试验(ISO 16000-30-2014) DIN ISO 16000-31-2014 室内空气. 第31部分: 基于有机磷化合物的阻燃剂和增塑剂的测定. 磷酸酯 (ISO 16000-31-2014) DIN ISO 16000-33-2017 室内空气. 第33部分:气相色谱/质谱(GC / MS)测定邻苯二甲酸酯(ISO 16000 - 33:2017) DIN ISO 16000-39-2020 室内空气. 第39部分: 胺的测定. 通过结合(超)高效液相色谱与高分辨率或串联质谱来对胺进行分析(ISO 16000-39-2019) DIN ISO 16000-4-2012 室内空气.第4部分:甲醛的测定.分散取样法(ISO 16000-4-2011) DIN ISO 16000-6-2012 室内空气.第6部分:通过在泰纳克斯TA吸收剂上活性取样、热解吸和MS或MS/FID气相色谱法测定室内和试验室空气中挥发性有机化合物的含量(ISO 16000-6-2011)

谁引用了DIN ISO 16000-8-2008 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号