IEEE C 37.43-2008
用于并联电容器的额定电压为1kV～38kV、高压冲击式熔断器、限流熔断器和组合型配电和功率级外部熔断器用规范

Specifications for high-voltage expulsion, current-limiting, and combination-type distribution and power class external fuses, with rated voltages from 1 kV through 38 kV, used for the protection of shunt capacitors

IEEE C 37.43-2008 发布历史

This standard establishes specifications for high-voltage (above 1000 V) distribution and power class expulsion, current-limiting, and combination-type external capacitor fuses and accessories, with rated voltages from 1 kV through 38 kV, for protecting shunt capacitors complying with IEEE Std 18™-20021 and NEMA CP 1-2000. All of these devices are intended for use on ac systems. These fuses may be used with capacitor units, groups of units, or entire banks and include specific capacitor line [group] and capacitor unit fuse types as follows: a) Current-limiting fuses b) Expulsion fuses IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors 2 Copyright © 2008 IEEE. All rights reserved. c) Combination of current-limiting and expulsion fuses d) Fuse supports, fuse mountings, and accessories used with fuses of type a), type b), and type c) e) Current-limiting, expulsion, and combination-type capacitor fuses [type a), type b), and type c), respectively] used in fuse enclosure packages (FEPs)

IEEE C 37.43-2008由美国电气电子工程师学会 US-IEEE 发布于 2008-07-25。

IEEE C 37.43-2008 在中国标准分类中归属于: L11 电容器，在国际标准分类中归属于: 29.120.50 熔断器和其他过载保护装置。

IEEE C 37.43-2008 发布之时，引用了标准

• ANSI C37.46-2000 电力熔断器和熔丝切断开关规范*， 2022-07-22 更新
• ANSI C37.47-2000 配电熔断式断路开关、熔断支座和限流熔断器的规范
• IEC 60282-1-2002 高压熔断器.第1部分:限流熔断器
• IEC 60549-1976 并联电力电容器外部保护用高压熔断器
• NEMA CP 1-2000 并联电容

* 在 IEEE C 37.43-2008 发布之后有更新，请注意新发布标准的变化。

IEEE C 37.43-2008的历代版本如下：

• 2008年07月25日 IEEE C 37.43-2008 用于并联电容器的额定电压为1kV～38kV、高压冲击式熔断器、限流熔断器和组合型配电和功率级外部熔断器用规范

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 IEEE C 37.43-2008 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

IEEE C 37.43-2008

发布日期

2008年07月25日

实施日期

废止日期

无

中国标准分类号

L11

国际标准分类号

29.120.50

发布单位

US-IEEE

引用标准

ANSI C37.42-1996 ANSI C37.46-2000 ANSI C37.47-2000 IEC 60282-1-2002 IEC 60282-2-1997 IEC 60549-1976 IEEE Std 18™-2002 IEEE Std C37.40™-2003 IEEE Std C37.41™-2000 IEEE Std C37.48™-2005 IEEE Std C37.48.1™-2002 NEMA CP 1-2000

适用范围

This standard establishes specifications for high-voltage (above 1000 V) distribution and power class expulsion, current-limiting, and combination-type external capacitor fuses and accessories, with rated voltages from 1 kV through 38 kV, for protecting shunt capacitors complying with IEEE Std 18™-20021 and NEMA CP 1-2000. All of these devices are intended for use on ac systems. These fuses may be used with capacitor units, groups of units, or entire banks and include specific capacitor line [group] and capacitor unit fuse types as follows: a) Current-limiting fuses b) Expulsion fuses IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors 2 Copyright © 2008 IEEE. All rights reserved. c) Combination of current-limiting and expulsion fuses d) Fuse supports, fuse mountings, and accessories used with fuses of type a), type b), and type c) e) Current-limiting, expulsion, and combination-type capacitor fuses [type a), type b), and type c), respectively] used in fuse enclosure packages (FEPs)