SAE J2271-2009
船舶系统和设备.柱头螺栓用部分标准.连续作用和双端引线(米制系列)
Ship Systems and Equipment Part Standard for Studs Continuous and Double End (Inch Series)
说明：
- 此图仅显示与当前标准最近的5级引用；
- 鼠标放置在图上可以看到标题编号；
- 此图可以通过鼠标滚轮放大或者缩小；
- 表示标准的节点，可以拖动；
- 绿色表示标准：SAE J2271-2009 ， 绿色、红色表示本平台存在此标准，您可以下载或者购买，灰色表示平台不存在此标准；
- 箭头终点方向的标准引用了起点方向的标准。
- 标准号
- SAE J2271-2009
- 发布日期
- 2009年05月05日
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- J13
- 国际标准分类号
- 21.060.01
- 发布单位
- 美国机动车工程师协会
- 引用标准
- ASME B1.1-2003 ASME B1.3M-1992 ASME B1.12-1987 ASME B18.18.1-2007 ASTM A193/A 193M-2008 ASTM A193/A 193M-2009 ASTM A307-2007 ASTM A354-2007 ASTM A380-2006 ASTM A449-2007 ASTM A967-2005 ASTM F468-2006 ASTM F593-2002 ASTM F788/F 788M-2008 ASTM F1
- 被代替标准
- SAE J 2271-2004
- 适用范围
- This SAE Parts Standard provides dimensional and quality assurance requirements for studs in the following configurations in standard materials used for ship system applications: a. Continuous thread studs in UNRC and 8UNR series in the following threads and diameters: UNRC threads (0.190 through 4 inches); UNRF threads (0.190 through 1-1/2 inches); 8UNR threads (1-1/8 through 4 inches) b. Double end studs (clamping type) where both ends are of the same minimum thread length in the following threads and diameters: UNRC threads (1/4 through 4 inches); UNRF threads (1/4 through 1-1/2 inches); 8UNR threads (1-1/8 through 4 inches); Different thread forms on each end are permissible. c. Double end studs (tap end type) where the tap end thread length is equivalent to 1-1/2 nominal diameters: Tap End Thread Forms and Diameters Nut End Thread Forms and Diameters; NC-5 interference-fit tap end threads (1/4 through 1-1/2 inches); UNRC threads (1/4 through 4 inches) - UNRC threads (1/4 through 4 inches); UNRF threads (1/4 through 1-1/2 inches); UNRF threads (1/4 through 1-1/2 inches); 8UNR threads (1-1/8 through 4 inches); 8UNR threads (1-1/8 through 4 Inches) These studs are primarily for use in ship systems and equipment. The continuous thread studs and the reduced body diameter double end studs are configurations particularly suited to applications that are subject to high impact (H.I.) shock requirements.