JIS B8378-2-2009
气液动力.压缩空气润滑器.第2部分:列入供应商资料中的产品主要特性的测定试验方法
Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
JIS B8378-2-2009 发布历史
This Standard specifies the test methods to determine the main characteristics of compressed-air lubricators specified in JIS B 8378-1, which are to be included in supplier's literature. This Standard can be applied to: - facilitate the comparison of lubricators by standardizing test mehtods; - assist in the proper application of lubricators in compressed-air systems. The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured. NOTE: The International Standard corresponding to this Standard and the sym¬bol of degree of correspondence are as follows: ISO 6301-2: 2006 Pneumatic fluid power-Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature (MOD) The symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/ lEe Guide 21.
JIS B8378-2-2009由日本工业标准调查会 JP-JISC 发布于 2009-03-20，并于 2009-03-23 实施。
JIS B8378-2-2009 在中国标准分类中归属于: J20 液压与气动装置，在国际标准分类中归属于: 23.100.99 其他流体动力系统部件。
JIS B8378-2-2009 发布之时，引用了标准
- JIS B0125-1 流体动力系统及部件.图形符号和线路图.第1部分:常规用图形符号和数据处理设备
- JIS B0142 流体传动系统和组件.词汇*， 2011-02-21 更新
- JIS B8378-1 气动液能.压缩空气润滑器.第1部分:加入供应商文献中的主要特点和产品标记要求*， 2011-11-21 更新
- JIS Z8203 国际单位制(SI)及其组合形式和某些其它单位的使用推荐规程
- JIS K2001 工业用液态润滑油.ISO粘度分类
* 在 JIS B8378-2-2009 发布之后有更新，请注意新发布标准的变化。
JIS B8378-2-2009的历代版本如下：
- 2000年08月20日 JIS B8378-2-2000 气液动力.压缩空气润滑器.第2部分:预定列入供应商资料中的产品主要特性的测定试验方法
- 2009年03月20日 JIS B8378-2-2009 气液动力.压缩空气润滑器.第2部分:列入供应商资料中的产品主要特性的测定试验方法
- 标准号
- JIS B8378-2-2009
- 发布日期
- 2009年03月20日
- 实施日期
- 2009年03月23日
- 废止日期
- 无
- 中国标准分类号
- J20
- 国际标准分类号
- 23.100.99
- 发布单位
- JP-JISC
- 引用标准
- JIS B0125-1 JIS B0142 JIS B8378-1 JIS Z8203 JIS B8309-2000 JIS K2001
- 被代替标准
- JIS B8378-2-2000
- 适用范围
- This Standard specifies the test methods to determine the main characteristics of compressed-air lubricators specified in JIS B 8378-1, which are to be included in supplier's literature. This Standard can be applied to: - facilitate the comparison of lubricators by standardizing test mehtods; - assist in the proper application of lubricators in compressed-air systems. The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured. NOTE: The International Standard corresponding to this Standard and the sym¬bol of degree of correspondence are as follows: ISO 6301-2: 2006 Pneumatic fluid power-Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature (MOD) The symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/ lEe Guide 21.