SAE J 1194-2009
有轮农用拖拉机的翻台式保护结构(ROPS)

Rollover Protective Structures (ROPS) for Wheeled agricultural tractors

SAE J 1194-2009 发布历史

Fulfillment of the intended purpose requires testing as follows: a laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE standard. Either the static test (5.1) or the dynamic test (5.2) shall be conducted; a crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude; a field upset test under reasonable controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 5.4.1.1 for requirements for the omission of this test.); and in addition to the laboratory and field loading requirements, there is a temperature-material requirement. The test procedures and performance requirements outlined in this document are based on currently available engineering data. The purpose of this document is to establish the test and performance requirements of a rollover protective structure (ROPS) designed for wheel-type agricultural tractors to minimize the frequency and severity of operator injury resulting from accidental upsets. All self-propelled implements are excluded.

SAE J 1194-2009由美国机动车工程师协会 US-SAE 发布于 2009-04-02。

SAE J 1194-2009 在中国标准分类中归属于: B90 农、林机械与设备综合，在国际标准分类中归属于: 13.340.20 头部防护设备,65.060.10 农业拖拉机和牵引车辆。

SAE J 1194-2009 发布之时，引用了标准

• ASTM A370-2009 *， 2022-07-22 更新
• SAE J 114-1994 (R)安全带五金织带磨损性能要求.1994年6月
• SAE J 140-1995 安全带硬件测试规程
• SAE J 141-1995 座位安全带五金性能要求
• SAE J 339-1994 座位安全带金属网摩擦试验程序
• SAE J 429-1999 外螺纹紧固件的机械和材料要求
• SAE J 800-1994 
• SAE J 995-1999 钢螺帽的机械和材料要求

* 在 SAE J 1194-2009 发布之后有更新，请注意新发布标准的变化。

SAE J 1194-2009的历代版本如下：

• 1977年06月01日 SAE J 1194-1977
• 2009年04月02日 SAE J 1194-2009 有轮农用拖拉机的翻台式保护结构(ROPS)

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE J 1194-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE J 1194-2009

发布日期

2009年04月02日

实施日期

废止日期

无

中国标准分类号

B90

国际标准分类号

13.340.20;65.060.10

发布单位

US-SAE

引用标准

ASTM A370-2009 SAE J 114-1994 SAE J 140-1995 SAE J 141-1995 SAE J 339-1994 SAE J 429-1999 SAE J 674-2005 SAE J 800-1994 SAE J 995-1999 SAE J 1349-2008

被代替标准

SAE J 1194-1999

适用范围

Fulfillment of the intended purpose requires testing as follows: a laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE standard. Either the static test (5.1) or the dynamic test (5.2) shall be conducted; a crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude; a field upset test under reasonable controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 5.4.1.1 for requirements for the omission of this test.); and in addition to the laboratory and field loading requirements, there is a temperature-material requirement. The test procedures and performance requirements outlined in this document are based on currently available engineering data. The purpose of this document is to establish the test and performance requirements of a rollover protective structure (ROPS) designed for wheel-type agricultural tractors to minimize the frequency and severity of operator injury resulting from accidental upsets. All self-propelled implements are excluded.

谁引用了SAE J 1194-2009 更多引用