DIN EN 13463-1-2009
潜在性爆炸环境的非电气设备.第1部分:基本方法和要求.英文版本DIN EN 13463-1-2009-07

Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements; English version of DIN EN 13463-1:2009-07

DIN EN 13463-1-2009 发布历史

This European Standard specifies the basic method and requirements for design, construction, testing and marking of non-electrical equipment intended for use in potentially explosive atmospheres in air of gas, vapour, mist and dusts. Such atmospheres can also exist inside the equipment. In addition, the external atmosphere can be drawn inside the equipment by natural breathing produced as a result of fluctuations in the equipment's internal operating pressure, and/or temperature. This European Standard is valid for atmospheres having pressures ranging from 0,8 bar to 1,1 bar and temperatures ranging from -20 ℃ to + 60 ℃., i.e. equipment built to this European Standard will be satisfactory to any service conditions within this range unless otherwise specified. NOTE 1 The requirements of this European Standard can also be helpful for the design, construction, testing and marking of equipment intended for use in atmospheres outside the validity range stated above. In this case however, the ignition hazard assessment, ignition protection provided, additional testing (if necessary), manufacturer's technical documentation and instructions to the user, should clearly demonstrate and indicate the equipment's suitability for the conditions it may encounter. It should also be recognized that changes in temperature and pressure can have a significant influence on ignitability. This European Standard does not cover additional marking for equipment intended for use outside the scope of its validity such as an oxygen-enriched atmosphere. This European Standard is also applicable for the design, construction, testing and marking of components, protective systems, devices and assemblies of these products which have possible ignition sources and are intended for use in potentially explosive atmospheres. It specifies the requirements for the design and construction of equipment, intended for use in potentially explosive atmospheres in conformity with all categories of Group I and II. This European Standard can be supplemented by European Standards concerning the specific types of ignition protection. NOTE 2 These are given below EN 13463-2, Non-electrical equipment for use in potentially explosive atmospheres - Protection by flow restricting enclosure (fr) EN 13463-3, Non-electrical equipment for use in potentially explosive atmospheres- Protection by flameproof enclosure (d) EN 13463-5, Non-electrical equipment for use in potentially explosive atmospheres - Protection by constructional safety (c) EN 13463-6, Non-electrical equipment for use in potentially explosive atmospheres - Protection by control of ignition sources (b) EN 60079-2, Electrical apparatus for explosive gas atmospheres - Pressurised enclosures "p" (Protection by pressurization described in EN 60079-2 can also be used for non-electrical equipment.) EN 13463-8, Non-electrical equipment for use in potentially explosive atmospheres - Protection by liquid immersion (k) EN 50303, Group I, category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust.

DIN EN 13463-1-2009由德国标准化学会 DE-DIN 发布于 2009-07，并于 2009-07-01 实施。

DIN EN 13463-1-2009 在中国标准分类中归属于: C67 工厂防火防爆安全技术，在国际标准分类中归属于: 13.230 防爆。

DIN EN 13463-1-2009 发布之时，引用了标准

• DIN EN 1127-2 爆炸性环境. 防爆和防护. 第2部分: 采矿的基本概念和方法学; 德文版本EN 1127-2-2014*， 2014-09-01 更新
• DIN EN 13463-6-2005 潜在爆炸性环境中使用的非电气设备.第6部分:着火源控制"b"型防护设备
• DIN EN 14986 工作在潜在易爆环境中电扇的设计;德文版本EN 14986-2017*， 2017-04-01 更新
• DIN EN 50303-2001 在有瓦斯和/或煤尘危险的大气中保持功能的1组M1类设备
• DIN EN 582 热喷涂.抗拉粘合强度的测定

* 在 DIN EN 13463-1-2009 发布之后有更新，请注意新发布标准的变化。

DIN EN 13463-1-2009的历代版本如下：

• 2002年04月 DIN EN 13463-1-2002 潜在性爆炸环境的非电气设备.第1部分:基本方法和要求; 德文版本 EN 13463-1:2001
• 2009年07月 DIN EN 13463-1-2009 潜在性爆炸环境的非电气设备.第1部分:基本方法和要求.英文版本DIN EN 13463-1-2009-07

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 13463-1-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 13463-1-2009

发布日期

2009年07月

实施日期

2009年07月01日

废止日期

无

中国标准分类号

C67

国际标准分类号

13.230

发布单位

DE-DIN

引用标准

DIN EN 1127-1-2007 DIN EN 1127-2 DIN EN 13237-2003 DIN EN 13463-6-2005 DIN EN 14986 DIN EN 50303-2001 DIN EN 60079-0-2006 DIN ISO 1817-2005 CLC/TR 50404-2003 DIN EN 582 ,,Seventh Report on the Specifications and Testing Conditions relating to Fire-resista

被代替标准

DIN EN 13463-1-2002 DIN EN 13463-1 Berichtigung 1-2003 DIN EN 13463-1-2007

适用范围

This European Standard specifies the basic method and requirements for design, construction, testing and marking of non-electrical equipment intended for use in potentially explosive atmospheres in air of gas, vapour, mist and dusts. Such atmospheres can also exist inside the equipment. In addition, the external atmosphere can be drawn inside the equipment by natural breathing produced as a result of fluctuations in the equipment's internal operating pressure, and/or temperature. This European Standard is valid for atmospheres having pressures ranging from 0,8 bar to 1,1 bar and temperatures ranging from -20 ℃ to + 60 ℃., i.e. equipment built to this European Standard will be satisfactory to any service conditions within this range unless otherwise specified. NOTE 1 The requirements of this European Standard can also be helpful for the design, construction, testing and marking of equipment intended for use in atmospheres outside the validity range stated above. In this case however, the ignition hazard assessment, ignition protection provided, additional testing (if necessary), manufacturer's technical documentation and instructions to the user, should clearly demonstrate and indicate the equipment's suitability for the conditions it may encounter. It should also be recognized that changes in temperature and pressure can have a significant influence on ignitability. This European Standard does not cover additional marking for equipment intended for use outside the scope of its validity such as an oxygen-enriched atmosphere. This European Standard is also applicable for the design, construction, testing and marking of components, protective systems, devices and assemblies of these products which have possible ignition sources and are intended for use in potentially explosive atmospheres. It specifies the requirements for the design and construction of equipment, intended for use in potentially explosive atmospheres in conformity with all categories of Group I and II. This European Standard can be supplemented by European Standards concerning the specific types of ignition protection. NOTE 2 These are given below EN 13463-2, Non-electrical equipment for use in potentially explosive atmospheres - Protection by flow restricting enclosure (fr) EN 13463-3, Non-electrical equipment for use in potentially explosive atmospheres- Protection by flameproof enclosure (d) EN 13463-5, Non-electrical equipment for use in potentially explosive atmospheres - Protection by constructional safety (c) EN 13463-6, Non-electrical equipment for use in potentially explosive atmospheres - Protection by control of ignition sources (b) EN 60079-2, Electrical apparatus for explosive gas atmospheres - Pressurised enclosures "p" (Protection by pressurization described in EN 60079-2 can also be used for non-electrical equipment.) EN 13463-8, Non-electrical equipment for use in potentially explosive atmospheres - Protection by liquid immersion (k) EN 50303, Group I, category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust.

DIN EN 13463-1-2009系列标准

谁引用了DIN EN 13463-1-2009 更多引用