DIN EN 1966-2009
结构粘合剂.三点弯曲法测量粘合剂表面的特性,DIN EN 1966:2009-07的英文版本

Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method; English version of DIN EN 1966:2009-07

DIN EN 1966-2009 发布历史

This European Standard describes a test method to determine ability of a cured adhesive (possibly with a primer) to adhere to a substrate which has had a certain surface finish or with a specific surface preparation by using the "three point bending method". It is only used for quality assurance and the substrate should be rigid or resistant enough to bending such as steel or aluminium alloys. For other substrates the thickness should be adjusted to the modulus of elasticity or a suitable stiffener should be used. The adhesive should be polymerisable (curable) without pressure in order to obtain the thickness needed to provide sufficient rigidity, otherwise, a bonded reinforcing piece of the same type and same thickness as the substrate can be substituted for the bloc of adhesive. It is not suitable for film adhesives.

DIN EN 1966-2009由德国标准化学会 DE-DIN 发布于 2009-07。

DIN EN 1966-2009 在中国标准分类中归属于: G38 胶粘剂基础标准与通用方法，在国际标准分类中归属于: 83.180 粘合剂和胶粘产品。

DIN EN 1966-2009 发布之时，引用了标准

• EN 923-2005 
• EN 10025-2 EN 10025-2-2019
• EN 13887 建筑粘合剂.粘结之前金属和塑料表面制备指南
• EN ISO 291 塑料.调节和测试用标准大气
• EN ISO 9142 粘合剂.胶粘件试验用标准实验室老化条件的选择指南;代替EN 29142-1993;ISO 9142-2003*， 2022-07-23 更新
• EN ISO 10365 粘合剂.主要失效模式的标识(ISO 10365-1992)
• ISO 286-1 产品几何技术规范(GPS).线性尺寸公差的ISO规范体系.第1部分:基本公差、偏差和定值*， 2010-04-01 更新

* 在 DIN EN 1966-2009 发布之后有更新，请注意新发布标准的变化。

DIN EN 1966-2009的历代版本如下：

• 2009年07月 DIN EN 1966-2009 结构粘合剂.三点弯曲法测量粘合剂表面的特性,DIN EN 1966:2009-07的英文版本

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 1966-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 1966-2009

发布日期

2009年07月

实施日期

废止日期

无

中国标准分类号

G38

国际标准分类号

83.180

发布单位

DE-DIN

引用标准

EN 923-2005 EN 10025-2 EN 13887 EN ISO 291 EN ISO 9142 EN ISO 10365 ISO 286-1

被代替标准

DIN EN 1966-2003 DIN EN 1966-2008

适用范围

This European Standard describes a test method to determine ability of a cured adhesive (possibly with a primer) to adhere to a substrate which has had a certain surface finish or with a specific surface preparation by using the "three point bending method". It is only used for quality assurance and the substrate should be rigid or resistant enough to bending such as steel or aluminium alloys. For other substrates the thickness should be adjusted to the modulus of elasticity or a suitable stiffener should be used. The adhesive should be polymerisable (curable) without pressure in order to obtain the thickness needed to provide sufficient rigidity, otherwise, a bonded reinforcing piece of the same type and same thickness as the substrate can be substituted for the bloc of adhesive. It is not suitable for film adhesives.