BS EN ISO 8230-1-2008
干洗机的安全性要求.第1部分:一般安全性要求(ISO 8230-1-2008)
Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
BS EN ISO 8230-1-2008 发布历史
This part of ISO 8230 specifies common safety requirements for dry-cleaning machines. It is applicable to dry-cleaning machines of all sizes intended for industrial and commercial use for the cleaning of articles made of textile, leather, furs and skins, using exclusively either perchloroethylene or combustible solvent as the cleaning medium. It is not applicable to: -machines placed at the disposal of the general public (self-service); -transfer machines as defined in 3.1.4; -ironing presses (see ISO 10472-1 and ISO 10472-6); -ancillary equipment, e.g. room ventilation equipment, waste recuperation systems of the still, external water cooling systems or external systems for solvent recovery from the still sludge. This part of ISO 8230 deals with all significant hazards arising from the use of the dry-cleaning machine, where “use of the dry-cleaning machine” comprises both intended use and foreseeable abnormal situations and includes commissioning, use and maintenance. It defines the common safety requirements for dry-cleaning machines and is intended to be used in conjunction with ISO 8230-2 and ISO 8230-3, as relevant. Specific requirements in those other parts of ISO 8230 take precedence over the respective requirements of this part of ISO 8230. It does not deal with hazards caused by processing items that can create an explosive atmosphere (e.g. printers' wipers containing a low-flash solvent), nor with machines processing loads that can contain “foreign solvents”, which could lead to a change in a property (characteristic) of the cleaning solvent, e.g. cause foaming or make it carcinogenic. This part of ISO 8230 applies to machines manufactured after the date of its issue.
BS EN ISO 8230-1-2008由英国标准学会 GB-BSI 发布于 2009-07-31，并于 2009-07-31 实施。
BS EN ISO 8230-1-2008 在中国标准分类中归属于: Y62 家用清洁、整容器具，在国际标准分类中归属于: 97.060 洗衣设备。
BS EN ISO 8230-1-2008 发布之时，引用了标准
- IEC 60204-1-2005 机械安全.机器的电气设备.第1部分:一般要求
- IEC 61496-1-2004 机械的安全.电敏保护设备.第1部分:一般要求和试验
- ISO 3744-1994 声学 声压法测定噪声源声功率级 一个反射面上方近似自由场中的工程法
- ISO 4871-1996 声学 机器和设备燥声辐射值的确定和检测
- ISO 5232-1998 纺织机械图形符号 两种语言版
- ISO 6178-1983 离心机 结构和安全规则 圆柱形转鼓壳体内切向应力的计算方法
- ISO 8230-2 干洗机的安全要求.第2部分:用四氯乙烯的机械
- ISO 8230-3 干洗机的安全要求.第3部分:用易燃溶剂的机械
- ISO 8232-1988 封闭式干洗机 定义和机器特性的检验
- ISO 11201-1995 声学 机器和设备发射的噪声 工作位置和其他指定位置发射声压级的测量 一个反射面上方近似自由场的工程法
- ISO/TR 11688-1-1995 声学 低噪声机器和设备设计的推荐实用规程 第1部分:计划
- ISO/TR 11688-2-1998 声学 低噪声机器和设备设计的推荐实用规程 第2部分:低噪声设计的物理工程说明
- ISO 12100-1-2003 机械安全.基本概念和设计通则.第1部分:基本术语、方法学
- ISO 12100-2-2003 机械安全.基本概念和设计通则.第2部分:技术原理
- ISO 13732-1 热环境的人类工效学.人对表面接触的反应的评定方法.第1部分:制热表面
- ISO 13732-3-2005 热环境的人类工效学.人对表面接触的反应的评定方法.第3部分:冷表面
- ISO 13849-1 机械安全.控制系统的相关安全部分.第1部分:设计用一般原理*， 2015-12-01 更新
* 在 BS EN ISO 8230-1-2008 发布之后有更新，请注意新发布标准的变化。
BS EN ISO 8230-1-2008的历代版本如下：
- 2009年07月31日 BS EN ISO 8230-1-2008 干洗机的安全性要求.第1部分:一般安全性要求(ISO 8230-1-2008)
- 2009年07月31日 BS EN ISO 8230-1-2009
- 标准号
- BS EN ISO 8230-1-2008
- 发布日期
- 2009年07月31日
- 实施日期
- 2009年07月31日
- 废止日期
- 无
- 中国标准分类号
- Y62
- 国际标准分类号
- 97.060
- 发布单位
- GB-BSI
- 引用标准
- IEC 60204-1-2005 IEC 61496-1-2004 ISO 3744-1994 ISO 4871-1996 ISO 5232-1998 ISO 6178-1983 ISO 8230-2 ISO 8230-3 ISO 8232-1988 ISO 11201-1995 ISO/TR 11688-1-1995 ISO/TR 11688-2-1998 ISO 12100-1-2003 ISO 12100-2-2003 ISO 13732-1 ISO 13732-3-2005 ISO 13849-1
- 被代替标准
- BS EN ISO 8230-1998
- 适用范围
- This part of ISO 8230 specifies common safety requirements for dry-cleaning machines. It is applicable to dry-cleaning machines of all sizes intended for industrial and commercial use for the cleaning of articles made of textile, leather, furs and skins, using exclusively either perchloroethylene or combustible solvent as the cleaning medium. It is not applicable to: -machines placed at the disposal of the general public (self-service); -transfer machines as defined in 3.1.4; -ironing presses (see ISO 10472-1 and ISO 10472-6); -ancillary equipment, e.g. room ventilation equipment, waste recuperation systems of the still, external water cooling systems or external systems for solvent recovery from the still sludge. This part of ISO 8230 deals with all significant hazards arising from the use of the dry-cleaning machine, where “use of the dry-cleaning machine” comprises both intended use and foreseeable abnormal situations and includes commissioning, use and maintenance. It defines the common safety requirements for dry-cleaning machines and is intended to be used in conjunction with ISO 8230-2 and ISO 8230-3, as relevant. Specific requirements in those other parts of ISO 8230 take precedence over the respective requirements of this part of ISO 8230. It does not deal with hazards caused by processing items that can create an explosive atmosphere (e.g. printers' wipers containing a low-flash solvent), nor with machines processing loads that can contain “foreign solvents”, which could lead to a change in a property (characteristic) of the cleaning solvent, e.g. cause foaming or make it carcinogenic. This part of ISO 8230 applies to machines manufactured after the date of its issue.