DIN EN ISO 23936-1-2009
石油,石化和天然气工业.与油和气生产有关的介质接触的非金属材料.第1部分:热塑性塑料(ISO 23936-1:2009),英文版本EN ISO 23936-1:2009

Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009); English version EN ISO 23936-1:2009

DIN EN ISO 23936-1-2009 发布历史

ISO 23936 as a whole presents general principles and gives requirements and recommendations for the selection and qualification, and gives guidance for the quality assurance, of non-metallic materials for service in equipment used in oil and gas production environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion failures of the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations. This part of ISO 23936 addresses the resistance of thermoplastics to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with production and chemical treatment. Interaction with sunlight is included; however, ionizing radiation is excluded from the scope of this part of ISO 23936. Furthermore, this part of ISO 23936 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment. The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers.

DIN EN ISO 23936-1-2009由德国标准化学会 DE-DIN 发布于 2009-12。

DIN EN ISO 23936-1-2009 在中国标准分类中归属于: E98 油、气集输设备。

DIN EN ISO 23936-1-2009 发布之时，引用了标准

• ISO 178 ISO 178-2019
• ISO 179-1 塑料.摆式冲击性能的测定.第1部分:非机械冲击试验*， 2010-06-01 更新
• ISO 306 塑料.热塑性材料.维卡特(VICAT)软化温度的测定*， 2013-11-01 更新
• ISO 527-1 ISO 527-1-2019
• ISO 868 塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度]
• ISO 1183-2 ISO 1183-2-2019
• ISO 2578 塑料 长期热暴露作用后时间和温度极限的测定
• ISO 11357-6 塑料.差示扫描量热法(DSC).第6部分:氧化诱导时间(等温OIT)和氧化诱导温度(动态OIT)的测定
• ISO 15156-1 ISO 15156-1-2020
• ISO 15156-2 ISO 15156-2-2020
• ISO 15156-3 ISO 15156-3-2020
• ASTM D638 塑料拉伸性能的标准试验方法
• ASTM D746 塑料和弹性体的冲击脆性温度的标准试验方法
• ASTM D792 塑料通过位移的密度和比重（相对密度）的标准测试方法

* 在 DIN EN ISO 23936-1-2009 发布之后有更新，请注意新发布标准的变化。

DIN EN ISO 23936-1-2009的历代版本如下：

• 2009年12月 DIN EN ISO 23936-1-2009 石油,石化和天然气工业.与油和气生产有关的介质接触的非金属材料.第1部分:热塑性塑料(ISO 23936-1:2009),英文版本EN ISO 23936-1:2009

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN ISO 23936-1-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN ISO 23936-1-2009

发布日期

2009年12月

实施日期

废止日期

无

中国标准分类号

E98

发布单位

DE-DIN

引用标准

ISO 178 ISO 179-1 ISO 306 ISO 527-1 ISO 868 ISO 1183-2 ISO 2578 ISO 11357-6 ISO 15156-1 ISO 15156-2 ISO 15156-3 ASTM D638 ASTM D746 ASTM D792

适用范围

ISO 23936 as a whole presents general principles and gives requirements and recommendations for the selection and qualification, and gives guidance for the quality assurance, of non-metallic materials for service in equipment used in oil and gas production environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion failures of the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations. This part of ISO 23936 addresses the resistance of thermoplastics to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with production and chemical treatment. Interaction with sunlight is included; however, ionizing radiation is excluded from the scope of this part of ISO 23936. Furthermore, this part of ISO 23936 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment. The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers.

DIN EN ISO 23936-1-2009系列标准