SAE ARP 1554D-2009
车辆运输单位负荷设备(ULD)

VehicleTransport Unit Load Devices (ULD)

SAE ARP 1554D-2009 发布历史

This document provides functional, dimensional, structural, and environmental requirements for vehicle transport devices used to transport vehicles in wide-body aircraft. These devices are intended for use either in conjunction with NAS 3610 or AS36100 approved air cargo pallets or with specially designed and approved air cargo pallets. The unit load device (ULD) shall facilitate alteration for carriage of general cargo during return haul. Pallet nets used in conjunction with existing pallets in order to restrain general cargo are also described in NAS 3610 and AS36100. The minimum essential criteria are identified by use of the word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be of primary importance in providing dependable, economical, and practical vehicle transport devices. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluations have shown alternate methods to be satisfactory. It is the intent of this document to specify minimum air and ground handling features and to ensure interchange capability and compatibility with present and future air transport and ground handling systems. It is not the intent of this document to specify equipment designs.

SAE ARP 1554D-2009由美国机动车工程师协会 US-SAE 发布于 2009-12-02。

SAE ARP 1554D-2009 在中国标准分类中归属于: T04 基础标准与通用方法，在国际标准分类中归属于: 55.180.30 空运集装箱、托盘和网。

SAE ARP 1554D-2009 发布之时，引用了标准

• ISO 4116-1986 航空货运设备 与飞机集装单元装置兼容的地面设备要求
• ISO 4117-1993 空运和空运/地面运输用托盘 规范和试验
• ISO 4171-1993 航空货运设备 联运托盘
• ISO 8097-2001 航空器 需审定的航空货运集装单元装置的最低适航性要求和试验条件
• ISO 8268-1987 航空货运设备 自动运输装置 基本要求
• ISO 9788-1990 航空货运设备 固定航空货物用承载能力为22250N(5000lbf)双螺柱接头的铸件
• ISO 16049-1-2001 航空货运设备 紧固带 第1部分：设计准则及试验方法
• ISO 16049-2-2005 航空货运设备.紧固带.第2部分:使用导则及绳套计算
• ISO 16412-2005 空运货物设备.空运货物托盘.使用指南
• SAE ARP 5486-2002 航空货物托盘使用指南
• SAE ARP 5595-2003 货物固定带.使用指南

SAE ARP 1554D-2009的历代版本如下：

• 2009年12月02日 SAE ARP 1554D-2009 车辆运输单位负荷设备(ULD)

SAE ARP 1554D-2009 车辆运输单位负荷设备(ULD) 由 SAE ARP 1554C-2002 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE ARP 1554D-2009 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE ARP 1554D-2009

发布日期

2009年12月02日

实施日期

废止日期

无

中国标准分类号

T04

国际标准分类号

55.180.30

发布单位

US-SAE

引用标准

PAS 21100 ISO 4116-1986 ISO 4117-1993 ISO 4171-1993 ISO 8097-2001 ISO 8268-1987 ISO 9788-1990 ISO 16049-1-2001 ISO 16049-2-2005 ISO 16412-2005 SAE ARP 1334 SAE ARP 5486-2002 SAE ARP 5595-2003 SAE ARP 36103-2004 SAE AS 1130 SAE AS 1491 SAE AS 5385-2000 SAE

被代替标准

SAE ARP 1554C-2002

适用范围

This document provides functional, dimensional, structural, and environmental requirements for vehicle transport devices used to transport vehicles in wide-body aircraft. These devices are intended for use either in conjunction with NAS 3610 or AS36100 approved air cargo pallets or with specially designed and approved air cargo pallets. The unit load device (ULD) shall facilitate alteration for carriage of general cargo during return haul. Pallet nets used in conjunction with existing pallets in order to restrain general cargo are also described in NAS 3610 and AS36100. The minimum essential criteria are identified by use of the word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be of primary importance in providing dependable, economical, and practical vehicle transport devices. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluations have shown alternate methods to be satisfactory. It is the intent of this document to specify minimum air and ground handling features and to ensure interchange capability and compatibility with present and future air transport and ground handling systems. It is not the intent of this document to specify equipment designs.

SAE ARP 1554D-2009 中可能用到的仪器设备