DIN EN 15001-2-2010
天然气基础设施.工业设备用操作压力大于0.5bar的气体设备管道工程和工业级非工业设备用操作压力大于5bar的气体设备管道工程.第2部分:试运转、操作和维修用详细功能要求.德文版本EN 15001-2-2008

Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning

DIN EN 15001-2-2010 发布历史

This European standard specifies detailed functional requirements for the commissioning, operation and maintenance of industrial gas installations operating above 0, 5 bar and domestic or commercial gas installations above 5 bar. For non-industrial [domestic and commercial] gas installations up to 5 bar, EN 1775 applies. This European standard also applies to gas installations up to 5 bar not within the scope of EN 1775 or other European standards, as well as to mixed installations [industrial and non-industrial]. The inlet connection to the appliance is normally the inlet isolation valve but can include the pipework downstream of this valve- if this pipework is not covered by the appliance standard, then this standard applies. The requirements for design, materials, construction, inspection and testing of gas installations over 0, 5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations are given in prEN 15001-1. In this standard the term 'gas' refers to combustible gases, which are gaseous at 15 ℃ and 1,013 mbar absolute pressure. These gases, are commonly referred to as manufactured gas, natural gas or liquid petroleum gases (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437:1993). LPG storage tanks (including all ancillaries fitted directly to the tanks) are excluded see EN 14570. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure. In this standard, all pressures are gauge pressures unless otherwise stated.

DIN EN 15001-2-2010由德国标准化学会 DE-DIN 发布于 2010-04，并于 2010-04-01 实施。

DIN EN 15001-2-2010 在中国标准分类中归属于: P94 金属设备与工艺管道安装工程，在国际标准分类中归属于: 23.040.01 管道部件和管道综合。

DIN EN 15001-2-2010 发布之时，引用了标准

• EN 15001-1 天然气基础设施.工业设施大于0-5巴,工业和非工业设施大于5巴工作压力的天然气装置管道.第1部分:设计的详细功能要求
• EN 12954 掩埋或浸没金属结构的阴极保护.管道用一般原理及应用
• EN 60079-29-1 *， 2016-12-01 更新

* 在 DIN EN 15001-2-2010 发布之后有更新，请注意新发布标准的变化。

DIN EN 15001-2-2010的历代版本如下：

• 2010年04月 DIN EN 15001-2-2010 天然气基础设施.工业设备用操作压力大于0.5bar的气体设备管道工程和工业级非工业设备用操作压力大于5bar的气体设备管道工程.第2部分:试运转、操作和维修用详细功能要求.德文版本EN 15001-2-2008

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 15001-2-2010 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 15001-2-2010

发布日期

2010年04月

实施日期

2010年04月01日

废止日期

无

中国标准分类号

P94

国际标准分类号

23.040.01

发布单位

DE-DIN

引用标准

EN 15001-1 EN 12954 EN 60079-10 EN 60079-14 EN 60079-17 EN 60079-29-1

被代替标准

DIN EN 15001-2-2004

适用范围

This European standard specifies detailed functional requirements for the commissioning, operation and maintenance of industrial gas installations operating above 0, 5 bar and domestic or commercial gas installations above 5 bar. For non-industrial [domestic and commercial] gas installations up to 5 bar, EN 1775 applies. This European standard also applies to gas installations up to 5 bar not within the scope of EN 1775 or other European standards, as well as to mixed installations [industrial and non-industrial]. The inlet connection to the appliance is normally the inlet isolation valve but can include the pipework downstream of this valve- if this pipework is not covered by the appliance standard, then this standard applies. The requirements for design, materials, construction, inspection and testing of gas installations over 0, 5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations are given in prEN 15001-1. In this standard the term 'gas' refers to combustible gases, which are gaseous at 15 ℃ and 1,013 mbar absolute pressure. These gases, are commonly referred to as manufactured gas, natural gas or liquid petroleum gases (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437:1993). LPG storage tanks (including all ancillaries fitted directly to the tanks) are excluded see EN 14570. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure. In this standard, all pressures are gauge pressures unless otherwise stated.

DIN EN 15001-2-2010系列标准

DIN EN 15001-2-2010 中可能用到的仪器设备