ISO 17925-2004
钢上锌和/或铝基涂层.单位面积涂层质量和化学组分的测定.重量分析法、感应耦合等离子体原子辐射光谱测定法和火焰原子吸收光谱测定法

Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry

标准号

ISO 17925-2004

发布日期

2004年11月

实施日期

废止日期

无

中国标准分类号

A29

国际标准分类号

25.220.40;77.080.20

发布单位

IX-ISO

被代替标准

ISO/FDIS 17925-2004

适用范围

This International Standard specifies methods of determining the coating mass per unit area by gravimetry and chemical composition on one side-surface of zinc- and/or aluminium-based coatings on steel by means of inductively coupled plasma atomic emission spectrometric or flame atomic absorption spectrometry. For example, this test method applies for zinc and/or aluminium based coatings on steel such as galvanize (hot dip and electrolytic), galvaneal (hot-dip), zinc-nickel electrolytic, zinc-5 % aluminium coating (hot-dip) and zinc-55 % aluminium coating (hot-dip). Galvanizing gives a pure zinc coating. Galvanealling gives a zinc-iron alloyed coating. Zinc-nickel electrolytic methods give zinc-nickel alloyed coatings. This method is applicable to zinc contents between 40 % (mass fraction) and 100 % (mass fraction); aluminium contents between 0,02 % (mass fraction) and 60 % (mass fraction); nickel contents between 7 % (mass fraction) and 20 % (mass fraction); iron contents between 0,2 % (mass fraction) and 20 % (mass fraction); silicon contents between 0,2 % (mass fraction) and 10 % (mass fraction); lead contents between 0,005 % (mass fraction) and 2 % (mass fraction). For example, the applicable elements for these products are as follows: galvanizing is specified for iron and aluminium; galvanealling is specified for zinc, iron and aluminium; zinc-nickel electrolytic methods are specified for zinc, iron and nickel; zinc-5 % aluminium coating is specified for zinc, iron, aluminium and silicon; zinc-55 % aluminium is specified for zinc, iron, aluminium and silicon. FAAS determination for the chemical composition of a coating layer is not applicable for zinc. These test methods are intended as referee methods to test such materials for compliance with mass per unit area and compositional specifications of International Standards.

ISO 17925-2004 中可能用到的仪器设备

谁引用了ISO 17925-2004 更多引用