BS ISO 14853-2005
塑料.含水系统中塑料材料的最大厌氧生物降解能力的测定.生物气产生的测量方法

Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production

BS ISO 14853-2005 发布历史

This International Standard specifies a method for the determination of the ultimate anaerobic biodegradability of plastics by anaerobic microorganisms. The conditions described in this International Standard do not necessarily correspond to the optimum conditions for the maximum degree of biodegradation to occur. The test calls for exposure of the test material to sludge for a period of up to 60 days, which is longer than the normal sludge retention time (25 to 30 days) in anaerobic digesters, though digesters at industrial sites can have much longer retention times. The method applies to the following materials: — Natural and/or synthetic polymers, copolymers or mixtures thereof; — Plastic materials which contain additives such as plasticizers, colorants or other compounds; — Water-soluble polymers; — Materials which, under the test conditions, do not inhibit the microorganisms present in the inoculum. Inhibitory effects can be determined using an inhibition control or by another appropriate method (see e.g. ISO 13641). If the test material is inhibitory to the inoculum, a lower test concentration, another inoculum or a pre-exposed inoculum can be used.

BS ISO 14853-2005由英国标准学会 GB-BSI 发布于 2005-02-17，并于 2005-02-17 实施。

BS ISO 14853-2005 在中国标准分类中归属于: G31 合成树脂、塑料基础标准与通用方法，在国际标准分类中归属于: 13.060.70 水的生物学特性的检验,83.080.01 塑料综合。

BS ISO 14853-2005的历代版本如下：

• 2005年02月17日 BS ISO 14853-2005 塑料.含水系统中塑料材料的最大厌氧生物降解能力的测定.生物气产生的测量方法
• 2016年07月31日 BS ISO 14853-2016 塑料.含水系统中塑料材料的最大厌氧生物降解能力的测定.生物气产生的测量方法

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS ISO 14853-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS ISO 14853-2005

发布日期

2005年02月17日

实施日期

2005年02月17日

废止日期

无

中国标准分类号

G31

国际标准分类号

13.060.70;83.080.01

发布单位

GB-BSI

代替标准

BS ISO 14853-2016

适用范围

This International Standard specifies a method for the determination of the ultimate anaerobic biodegradability of plastics by anaerobic microorganisms. The conditions described in this International Standard do not necessarily correspond to the optimum conditions for the maximum degree of biodegradation to occur. The test calls for exposure of the test material to sludge for a period of up to 60 days, which is longer than the normal sludge retention time (25 to 30 days) in anaerobic digesters, though digesters at industrial sites can have much longer retention times. The method applies to the following materials: — Natural and/or synthetic polymers, copolymers or mixtures thereof; — Plastic materials which contain additives such as plasticizers, colorants or other compounds; — Water-soluble polymers; — Materials which, under the test conditions, do not inhibit the microorganisms present in the inoculum. Inhibitory effects can be determined using an inhibition control or by another appropriate method (see e.g. ISO 13641). If the test material is inhibitory to the inoculum, a lower test concentration, another inoculum or a pre-exposed inoculum can be used.