ISO 3405:2011
石油产品.气压下蒸馏特性的测定

Petroleum products - Determination of distillation characteristics at atmospheric pressure


标准号
ISO 3405:2011
发布
2011年
发布单位
国际标准化组织
替代标准
ISO 3405:2019
当前最新
ISO 3405:2019
 
 
引用标准
ISO 3170 ISO 3171 ISO 4259 ISO 4788:2005 ISO 918
适用范围
WARNING — The use of this International Standard may involve hazardous materials, operations and equipment. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. This International Standard specifies a laboratory test method, utilizing either manual or automated equipment, for determining the distillation characteristics of light and middle distillates derived from petroleum and having initial boiling points above 0 °C and end points below approximately 400 °C. Light distillates are typically automotive engine petrols, automotive engine petrols with up to 10 % (V/V) ethanol and aviation petrols. Middle distillates are aviation turbine fuels, kerosenes, diesel, diesel with up to 20 % (V/V) FAME (fatty acid methylesters), burner fuels and marine fuels that have no appreciable quantities of residua. NOTE For the purposes of this International Standard, “% (V/V)” is used to represent the volume fraction of a material.

ISO 3405:2011相似标准


推荐

FCJH-108石油产品减压蒸馏测定仪_减压蒸馏试验器

本仪器是根据国家标准GB/T9168《石油产品减压蒸馏测定法》对仪器要求专门设计制造。减压蒸馏试验器适用于在减压状态下测定液体zui高温度达到400℃时,能部分或全部蒸发石油产品沸点范围。减压蒸馏试验器用于测定在常压下蒸馏可能分解石油产品及馏分蒸馏特性石油产品减压蒸馏测定仪结构组成:仪器由主机与投入式制冷仪两部分组成。...

石油产品蒸馏测定

 石油产品蒸馏测定仪按照GB/T6536石油产品蒸馏测定法标准设计制造。适用于天然汽油(稳定轻烃)、车用汽油、航空汽油、喷气燃料、特殊沸点溶剂、石脑油、石油溶剂油、煤油、柴油、粗柴油、馏分燃料和相似的石油产品馏分测定。     DYH—107C 石油产品蒸馏测定仪执行标准:GB/T6536石油产品常压蒸馏特性测定法。...

石脑油馏程测定注意事项有哪些

石油产品馏程测定运行程序,采用高质量、zui简捷模块化程序设计,并与硬件有机结合,使得馏程测定过程升温和冷却、液位跟踪、记录温度、打印等全部工作自动完成,达到了一键出结果操作方式。石油产品蒸馏仪自动检测所在环境大气压和测定仪内工作温度,并对测定结果进行了在标准大气压下自动补偿,使测试结果增加了可比性。石油产品蒸馏仪预设了16组测定参数,供检测不同试样时选用,便于检测操作。...

石油产品馏程测定操作经验分享

石油产品馏程测定运行程序,采用高质量、zui简捷模块化程序设计,并与硬件有机结合,使得馏程测定过程升温和冷却、液位跟踪、记录温度、打印等全部工作自动完成,达到了一键出结果操作方式。石油产品蒸馏仪自动检测所在环境大气压和测定仪内工作温度,并对测定结果进行了在标准大气压下自动补偿,使测试结果增加了可比性。石油产品蒸馏仪预设了16组测定参数,供检测不同试样时选用,便于检测操作。...


ISO 3405:2011 中可能用到的仪器设备


谁引用了ISO 3405:2011 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号