DIN EN 10351-2011
黑色金属材料的化学分析.非合金和低合金钢的对电感耦合等离子体发射光谱分析.Mn,P,Cu,Ni,Cr,Mo,V,Co,Al(总)和Sn含量的测定(常规方法).德文版本EN 10351-2011

Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]; German version EN 10351:20


DIN EN 10351-2011 发布历史

This European Standard specifies an inductively coupled plasma optical emission spectrometry routine method for the analysis of unalloyed and low alloyed steels, whose iron content shall be at least 95 %. This method is applicable to the elements listed in Table 1 within the ranges shown. In all cases, the ranges specified can be extended or adapted (after validation) for the determination of other mass fractions, provided that the iron content in the samples under concern is above 95 %. Other elements may be included. However such elements and their mass fractions should be carefully checked, taking into account the possible interferences, the sensitivity, the resolution and the linearity criteria of each instrument and each wavelength. Depending also on the sensitivity of each instrument, suitable dilutions of the calibration and the test sample solutions may be necessary. Moreover, even if the method described is ""multi elemental"", it is not absolutely necessary to carry out the determination of all the elements of its scope simultaneously: the measurement conditions have to be optimised by each laboratory, depending on the performances of each apparatus available. NOTE 1 The accuracy of the method is unsatisfactory for phosphorus contents from 0,05 to 0,1 %. NOTE 2 The trueness of the method couldn't be checked for vanadium contents below 0,05 %. NOTE 3 The precision of the method is unsatisfactory for aluminium (total) contents below 0,02 %.

DIN EN 10351-2011由德国标准化学会 DE-DIN 发布于 2011-05。

DIN EN 10351-2011 在中国标准分类中归属于: H11 钢铁与铁合金分析方法,在国际标准分类中归属于: 77.140.10 热处理钢,77.140.45 非合金钢。

DIN EN 10351-2011的历代版本如下:

  • 2011年05月 DIN EN 10351-2011 黑色金属材料的化学分析.非合金和低合金钢的对电感耦合等离子体发射光谱分析.Mn,P,Cu,Ni,Cr,Mo,V,Co,Al(总)和Sn含量的测定(常规方法).德文版本EN 10351-2011

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 DIN EN 10351-2011 前三页,或者稍后再访问。

点击下载后,生成下载文件时间比较长,请耐心等待......

 



标准号
DIN EN 10351-2011
发布日期
2011年05月
实施日期
废止日期
中国标准分类号
H11
国际标准分类号
77.140.10;77.140.45
发布单位
DE-DIN
适用范围
This European Standard specifies an inductively coupled plasma optical emission spectrometry routine method for the analysis of unalloyed and low alloyed steels, whose iron content shall be at least 95 %. This method is applicable to the elements listed in Table 1 within the ranges shown. In all cases, the ranges specified can be extended or adapted (after validation) for the determination of other mass fractions, provided that the iron content in the samples under concern is above 95 %. Other elements may be included. However such elements and their mass fractions should be carefully checked, taking into account the possible interferences, the sensitivity, the resolution and the linearity criteria of each instrument and each wavelength. Depending also on the sensitivity of each instrument, suitable dilutions of the calibration and the test sample solutions may be necessary. Moreover, even if the method described is ""multi elemental"", it is not absolutely necessary to carry out the determination of all the elements of its scope simultaneously: the measurement conditions have to be optimised by each laboratory, depending on the performances of each apparatus available. NOTE 1 The accuracy of the method is unsatisfactory for phosphorus contents from 0,05 to 0,1 %. NOTE 2 The trueness of the method couldn't be checked for vanadium contents below 0,05 %. NOTE 3 The precision of the method is unsatisfactory for aluminium (total) contents below 0,02 %.




Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号