BS EN 15984:2011
石油工业和产品.精炼可燃气体合成物的测定以及碳含量和热值的计算.气相色谱法

Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method

2017-09

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 BS EN 15984:2011 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “立即购买” 按钮开始采购(由第三方提供)。

 

标准号
BS EN 15984:2011
发布
2011年
发布单位
英国标准学会
替代标准
BS EN 15984:2017
当前最新
BS EN 15984:2022
 
 
适用范围
This European Standard defines a gas chromatographic analysis for the determination of the composition of fuel gases, as used in refinery heating gas. These results are used to calculate the carbon content and the lower calorific value. With this gas chromatographic analysis, an overall of 23 refinery heating gas components are determined in concentrations as typically found in refineries (see Table 1 for further details). Water is not analysed. The results represent dry gases. NOTE 1 Depending on the equipment used, there is a possibility to determine higher hydrocarbons as well. NOTE 2 For the purposes of this European Standard, the terms “% (V/V)” is used to represent the volume fraction (φ). IMPORTANT — This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations.

BS EN 15984:2011相似标准


推荐

湖北锐意推出通量气体检测等高端气体分析仪器

三、燃气热值分析解决方案天然、沼气以及工业生产中可燃气体高效利用对节能减排具有十分重要意义。准确测量可燃气体成分及热值并自动优化控制燃烧过程是提高燃烧效率控制排放污染重要途经。天然等碳氢燃料气体成分分析主要依赖色谱法,但该方法响应时间达90s以上,往往不能满足大多数场合实时控制应用需求。...

浅谈色谱技术在食品安全检测中应用

1.色谱技术概述   1.1 色谱技术概念   色谱法(gas chromatography,简称 GC) 是色谱法中最广泛使用一种分析方法,其是以惰性气体(N:或 He)为载体将样品带入色谱仪进行分析色谱法,而利用色谱仪对气体或液体样品进行组分分析技术。它特别适用于气体混合物或易挥发性液体或固体检测,即便对于很复杂混合物,其分离时间也很短。   ...

色谱仪测定煤气中粗苯含量

煤气是由多种可燃成分组成一种气体燃料。煤气种类繁多,成分也很复杂。粗苯是煤热解生成粗煤气中产物之一,经脱氨后焦炉煤气中回收苯系化合物,其中以苯含量为主,称之为粗苯。一般煤气中苯族烃含量控制在3~5 g/m3,这一指标对大型焦化厂粗苯回收是经济合理。因此测定塔后煤气粗苯含量很必要。下面探讨用色谱测定煤气中粗苯。...

全面介绍有机元素分析法

1960年~至今,有人尝试将色谱法用于元素分析,并获得了初步成功。后经不断改进,微量化、自动化、计算机数据处理以及多元素联合测定成为有机元素分析新特点。有机元素分析原理主要是利用高温燃烧法测定原理来分析样品中常规有机元素含量。有机物中常见元素有(C)、氢(H)、氧(O)、氮(N)、硫(S)等。...


BS EN 15984:2011 中可能用到的仪器设备





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号