SAE MA 3375C-2011
符合UNS S66286 900 MPa抗拉强度公制采购规范的耐腐蚀和耐热钢螺栓

Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric

SAE MA 3375C-2011 发布历史

This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Number System as UNS S66286. The following specification designations and their properties are covered: MA3375 900 MPa minimum ultimate tensile strength at room temperature; MA3375-1 900 MPa minimum ultimate tensile strength at room temperature, 480 MPa stress-rupture strength at 650 degrees C; MA3375-2 900 MPa minimum ultimate tensile strength at room temperature, 590 MPa minimum ultimate shear strength at room temperature. Two types of studs are covered as follows: Type I - studs with stud end thread having special oversize pitch diameter and lead thread with undersize pitch diameter, while nut end thread is standard size; and Type II - studs with stud end thread and nut end thread standard size.

SAE MA 3375C-2011由美国机动车工程师协会 US-SAE 发布于 2011-08-09。

SAE MA 3375C-2011 在中国标准分类中归属于: V20 紧固件，在国际标准分类中归属于: 49.030.20 螺栓、螺钉、螺柱。

SAE MA 3375C-2011 发布之时，引用了标准

• ASME B46.1-2009 表面纹理(表面粗糙度,波纹度和花纹方向)*， 2022-07-25 更新
• SAE MA 1370-1990 MJ剖面螺纹,公制[代替: SAE AS 1370A]

* 在 SAE MA 3375C-2011 发布之后有更新，请注意新发布标准的变化。

SAE MA 3375C-2011的历代版本如下：

• 2011年08月09日 SAE MA 3375C-2011 符合UNS S66286 900 MPa抗拉强度公制采购规范的耐腐蚀和耐热钢螺栓

SAE MA 3375C-2011 乙羧氟草醚乳油 由 SAE MA 3375B-1995 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE MA 3375C-2011 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE MA 3375C-2011

发布日期

2011年08月09日

实施日期

废止日期

无

中国标准分类号

V20

国际标准分类号

49.030.20

发布单位

US-SAE

引用标准

ASME B46.1-2009 ASTM D 3951-2010 ASTM E 8-2004 ASTM E 112-2010 ASTM E 139-2011 ASTM E 140-2007 ASTM E 1417-2005 SAE AMS 2759/3 SAE AMS 5731 SAE AMS 5732 SAE AMS 5734 SAE AMS 5737 SAE AS 3062 SAE AS 3063 SAE MA 1370-1990 SAE MA 1518 SAE MA 1520-1987 SAE MA

被代替标准

SAE MA 3375B-1995

适用范围

This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Number System as UNS S66286. The following specification designations and their properties are covered: MA3375 900 MPa minimum ultimate tensile strength at room temperature; MA3375-1 900 MPa minimum ultimate tensile strength at room temperature, 480 MPa stress-rupture strength at 650 degrees C; MA3375-2 900 MPa minimum ultimate tensile strength at room temperature, 590 MPa minimum ultimate shear strength at room temperature. Two types of studs are covered as follows: Type I - studs with stud end thread having special oversize pitch diameter and lead thread with undersize pitch diameter, while nut end thread is standard size; and Type II - studs with stud end thread and nut end thread standard size.

谁引用了SAE MA 3375C-2011 更多引用