SAE AMS 4172E-2005
1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511)通过拉伸进行溶解热处理和应力消除的铝合金挤材

Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching

SAE AMS 4172E-2005 发布历史

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing. These products have been used typically for parts requiring moderate strength, especially where such parts require brazing or welding and where distortion during machining must be minimized, but usage is not limited to such applications.

SAE AMS 4172E-2005由美国机动车工程师协会 US-SAE 发布于 2005-08-31。

SAE AMS 4172E-2005 在中国标准分类中归属于: V11 航空与航天用金属铸锻材料，在国际标准分类中归属于: 49.025.20 铝。

SAE AMS 4172E-2005的历代版本如下：

• 2005年08月31日 SAE AMS 4172E-2005 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511)通过拉伸进行溶解热处理和应力消除的铝合金挤材

SAE AMS 4172E-2005 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511)通过拉伸进行溶解热处理和应力消除的铝合金挤材 于 2013-04-19 变更为 SAE AMS 4172F-2013 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511 or T4510)溶解热处理和通过拉伸进行应力消除的铝合金挤压制品。

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE AMS 4172E-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE AMS 4172E-2005

发布日期

2005年08月31日

实施日期

废止日期

无

中国标准分类号

V11

国际标准分类号

49.025.20

发布单位

US-SAE

代替标准

SAE AMS 4172F-2013

适用范围

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing. These products have been used typically for parts requiring moderate strength, especially where such parts require brazing or welding and where distortion during machining must be minimized, but usage is not limited to such applications.