ISO 10896-1:2012
越野卡车.安全性要求和检验.第1部分:可变-前移式叉车

Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks


标准号
ISO 10896-1:2012
发布
2012年
中文版
GB/T 35205.1-2017 (等同采用的中文版本)
发布单位
国际标准化组织
替代标准
ISO 10896-1:2020
当前最新
ISO 10896-1:2020
 
 
引用标准
IEC 60529 ISO 10263-3 ISO 10570 ISO 11112:1995 ISO 12508 ISO 13284 ISO 13732-1 ISO 13849-1 ISO 13850 ISO 15817 ISO 16528-1:2007 ISO 16528-2 ISO 21507 ISO 22915-10 ISO 22915-14 ISO 22915-20 ISO 2330 ISO 2867:2011 ISO 3449 ISO 3450 ISO 3457 ISO 3471:2008 ISO 3795 ISO 3864-1 ISO 3864-2 ISO 5053 ISO 5353 ISO 6016:2008 ISO 6682 ISO 6683 ISO 7000 ISO 7096:2000 ISO 9244 ISO 9533
适用范围
This part of ISO 10896 specifies general safety requirements for non-slewing, variable-reach rough-terrain trucks (hereafter known as “trucks”), with an articulated or rigid chassis and equipped with a telescopic lifting means (pivoting boom) on which a load-handling device such as a carriage with fork arms is typically fitted. Fork arms and other integrated attachments are considered to be parts of the truck. Other standards, in addition to the relevant provisions of this part of ISO 10896, can apply to the attachments. This part of ISO 10896 is not applicable to the following: a) industrial variable-reach trucks covered by ISO 3691-2; b) machines designed primarily for earth-moving, such as loaders, even if their buckets are replaced by fork arms (see ISO 20474); c) trucks designed primarily with variable-length load suspension elements (e.g. chain, ropes) from which the load may swing freely in all directions (mobile cranes)1); d) trucks fitted with personnel/work platforms, designed to move persons to elevated working positions2; e) trucks designed primarily for container handling. The significant hazards covered by this part of ISO 10896 are listed in Annex A. This part of ISO 10896 does not address hazards that can occur — during manufacture, — when handling suspended loads, which may swing freely, — when using trucks on public roads, — when operating in potentially explosive atmospheres, or — with a battery, LPG or hybrid as the primary power source.

ISO 10896-1:2012相似标准


推荐

977项国家标准项目拟立项

2020/8/31698肥料中总氮含量的测定 杜马斯燃烧法制订2020/8/31699工业车辆 集装箱吊具和抓臂操作用指示灯技术要求修订2020/8/31700聚乙烯管材和管件炭黑含量的测定(热失重法)修订2020/8/31701冷拔精密单层焊接钢管修订2020/8/31702越野叉车 非集成人员工作平台 1部分:设计、安全要求及验证制订2020/8/31703越野叉车 安全要求及验证 6部分...

一批国家标准将制定(517项)

部分:首饰制订2021/1/2919生活垃圾回收利用技术要求修订2021/1/2920表面化学分析 原子力显微术 用于纳米结构测量的原子力显微镜探针柄轮廓原位表征程序制订2021/1/2921皮革 抗菌性能的测定 1部分:膜接触法制订2021/1/2922气瓶直立道路运输技术要求修订2021/1/2923越野叉车 验证视野的试验方法 1部分:伸缩臂叉车制订2021/1/2924家用和类似用途舒适风扇及其调速器的性能测试方法制订...

517项推荐性国家标准项目征求意见

31部分:首饰制订2021/1/2919生活垃圾回收利用技术要求修订2021/1/2920表面化学分析 原子力显微术 用于纳米结构测量的原子力显微镜探针柄轮廓原位表征程序制订2021/1/2921皮革 抗菌性能的测定 1部分:膜接触法制订2021/1/2922气瓶直立道路运输技术要求修订2021/1/2923越野叉车 验证视野的试验方法 1部分:伸缩臂叉车制订2021/1/2924家用和类似用途舒适风扇及其调速器的性能测试方法制订...

343项国家标准发布(附清单)

-2019智能家用电器系统互操作 5部分:智能家用电器接口规范2020/5/1145GB/T 38053-2019装配支吊架通用技术要求2020/9/1146GB/T 38054-2019海洋铺管船用聚氨酯张紧器垫块2020/9/1147GB/T 38055.1-2019越野叉车 对用户的要求 1部分:通用要求2020/5/1148GB/T 38056-2019液体硫磺中硫化氢和多硫化氢的测定...


谁引用了ISO 10896-1:2012 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号