DIN EN 10298-2005
岸上和海底管路用钢管和管件.水泥灰浆内衬.德文版本EN 10298-2005

Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; English version of DIN EN 10298:2005

DIN EN 10298-2005 发布历史

This European Standard specifies requirements for cement mortar linings for protecting the internal surface of steel tubes and pipeline components. It also specifies requirements for their application. It is applicable to the linings of tubes that have been welded longitudinally or spirally, seamless tubes and non-alloy steel components used for fluid transportation. This European Standard does not cover in situ applied or rehabilitation linings. This type of lining is used in particular in the transport and distribution, under pressure or by gravity, of water intended for human consumption and industrial use, and also in fire extinguishing and waste water systems. The temperature of the water transported should not exceed 50 ~C. Higher working temperature can be used by agreement of the parties. The constituent materials of cement mortar lining, when used under the conditions for which they are designed, in permanent or temporary contact with water intended for human consumption, shall not change the quality of that water to such an extent that it fails to comply with the requirements of European regulations. For this purpose, reference shall be made to the relevant national standards transposing EN standards when available, dealing with the influence of materials on water quality.

DIN EN 10298-2005由德国标准化学会 DE-DIN 发布于 2005-12。

DIN EN 10298-2005 在中国标准分类中归属于: E94 海洋石油作业用设备，在国际标准分类中归属于: 23.040.10 铁管和钢管,23.040.20 塑料管,23.040.40 金属配件。

DIN EN 10298-2005 发布之时，引用了标准

• EN 196-1 水泥试验方法-第1部分:强度的测定*， 2016-04-01 更新
• EN 197-1 水泥-第1部分:组成,规范和合格标准普通水泥(取代:CEN EN 197 - 4,197 - 4 / PRA1）*， 2011-09-01 更新
• EN 1744-1 岩石颗粒化学性能试验方法.第1部分:化学分析*， 2022-07-16 更新
• ISO 565 试验筛 金属丝编织网、金属穿孔板和电成型薄板 筛孔的公称网孔尺寸
• ISO 2591-1 筛分试验 第1部分:用于金属丝编织网及金属穿孔板的筛分试验方法
• ISO 3310-1 试验筛.技术要求和试验.第1部分:金属丝编织网试验筛*， 2016-08-01 更新

* 在 DIN EN 10298-2005 发布之后有更新，请注意新发布标准的变化。

DIN EN 10298-2005的历代版本如下：

• 2005年12月 DIN EN 10298-2005 岸上和海底管路用钢管和管件.水泥灰浆内衬.德文版本EN 10298-2005

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 DIN EN 10298-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

DIN EN 10298-2005

发布日期

2005年12月

实施日期

废止日期

无

中国标准分类号

E94

国际标准分类号

23.040.10;23.040.20;23.040.40;25.220.99

发布单位

DE-DIN

引用标准

EN 196-1 EN 197-1 EN 1744-1 ISO 565 ISO 2591-1 ISO 3310-1

被代替标准

DIN EN 10298-1998 DIN 2614-1990

适用范围

This European Standard specifies requirements for cement mortar linings for protecting the internal surface of steel tubes and pipeline components. It also specifies requirements for their application. It is applicable to the linings of tubes that have been welded longitudinally or spirally, seamless tubes and non-alloy steel components used for fluid transportation. This European Standard does not cover in situ applied or rehabilitation linings. This type of lining is used in particular in the transport and distribution, under pressure or by gravity, of water intended for human consumption and industrial use, and also in fire extinguishing and waste water systems. The temperature of the water transported should not exceed 50 ~C. Higher working temperature can be used by agreement of the parties. The constituent materials of cement mortar lining, when used under the conditions for which they are designed, in permanent or temporary contact with water intended for human consumption, shall not change the quality of that water to such an extent that it fails to comply with the requirements of European regulations. For this purpose, reference shall be made to the relevant national standards transposing EN standards when available, dealing with the influence of materials on water quality.