BS EN 61185:2005
电源用铁氧体磁芯(ETD磁芯).尺寸
Ferrite cores (ETD-cores) intended for use in power supply applications - Dimensions
2016-03
购买全文，请联系:
- 标准号
- BS EN 61185:2005
- 发布
- 2005年
- 发布单位
- 英国标准学会
- 替代标准
- BS EN 62317-6:2016
- 当前最新
- BS EN 62317-6:2016
- 引用标准
- IEC 60205-2001
- 被代替标准
- 04/30112548 DC-2004 BS EN 61185:1997
- 适用范围
- This International Standard specifies the dimensions that are of importance for mechanical interchangeability for ETD-cores made of ferrite, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them. NOTE 1 Whilst this standard mainly applies to ferrite, its validity for iron powder cores should not be overlooked. NOTE 2 The cores covered by this standard are designed for use in power transformers and chokes operating at high flux density and generally at frequencies higher than those feasible with EC-cores of the same material, due to a core proportioning more suitable for high-frequency applications. They are generally used in pairs. The use of “derived” standards which give more detailed specifications of component parts whilst still permitting compliance with this standard is discussed in Annex A, which also contains an example of a derived standard for coil formers.
BS EN 61185:2005相似标准
推荐
电子变压器的用途
在电源技术中的应用 电源装置中的电子变压器一般要使用由软磁磁芯制成的电子变压器(软磁电磁元件)。虽然，已经有不用软磁磁芯的空芯电子变压器和压电陶瓷变压器，但是，到21世纪初期，绝大多数的电源装置中的电子变压器，仍然使用软磁磁芯。 ...
电源技术对电子变压器的要求二
作为电子变压器的磁芯用材料，硅钢和铁基非晶合金占优势，而锰锌铁氧体处于劣势。功率传送的第二种是电感器传送方式，即输入给电感器绕组的电能，使磁芯激磁，变为磁能储存起来，然后通过去磁变成电能释放给负载。传送功率的大小决定于电感器磁芯的储能，也就是决定于电感器的电感量。电感量不直接与饱和磁通密度有关，而与磁导率有关，磁导率高，电感量大，储能多，传送功率大。...