ASTM C308-2000(2012)e1
耐化学侵蚀树脂灰浆施工时间、初凝时间及维护凝固强度时间的标准试验方法

Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

ASTM C308-2000(2012)e1 发布历史

4. Significance and UseTop Bottom

4.1 These test methods offer a means of determining the working time, initial setting time and service strength setting time of chemical-resistant resin mortars. The results obtained should serve as a guide in, but not as the sole basis for, selection of a chemical-resistant mortar for a particular application.

1.1 These test methods cover the determination of the working, initial setting, and service strength setting times of chemical-resistant resin mortars.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM C308-2000(2012)e1由美国材料与试验协会 US-ASTM 发布于 2000。

ASTM C308-2000(2012)e1 在中国标准分类中归属于: Q13 混凝土、集料、灰浆、砂浆。

ASTM C308-2000(2012)e1的历代版本如下：

• 2000年03月10日 ASTM C308-00 耐化学性树脂灰浆的初凝工作时间和使用强度的试验方法
• 2005年10月01日 ASTM C308-00(2005) 耐化学性树脂灰浆的初凝工作时间和使用强度的试验方法
• 2012年08月01日 ASTM C308-00(2012)e1 耐化学性树脂灰浆的初凝工作时间和使用强度的试验方法
• 2018年09月01日 ASTM C308-18 耐化学性树脂灰浆初凝和使用强度凝结时间的标准实施规程
• 2000年 ASTM C308-2000 耐化学腐蚀树脂灰浆施工时间、凝固时间及维护凝固强度时间的标准试验方法
• 2000年 ASTM C308-2000(2005) 耐化学腐蚀树脂灰浆施工时间、凝固时间及维护凝固强度时间的标准试验方法
• 2000年 ASTM C308-2000(2012)e1 耐化学侵蚀树脂灰浆施工时间、初凝时间及维护凝固强度时间的标准试验方法

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM C308-2000(2012)e1 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

ASTM C308-2000(2012)e1

发布日期

2000年

实施日期

废止日期

无

中国标准分类号

Q13

国际标准分类号

91.100.10 (Cement. Gypsum. Lime. Mortar)

发布单位

US-ASTM

适用范围

4. Significance and Use

Top Bottom

4.1 These test methods offer a means of determining the working time, initial setting time and service strength setting time of chemical-resistant resin mortars. The results obtained should serve as a guide in, but not as the sole basis for, selection of a chemical-resistant mortar for a particular application.

1.1 These test methods cover the determination of the working, initial setting, and service strength setting times of chemical-resistant resin mortars.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.