IEC 60695-11-3:2012由国际电工委员会 IX-IEC 发布于 2012-08,并于 2012-08-15 实施。
IEC 60695-11-3:2012 在中国标准分类中归属于: C80 消防综合,在国际标准分类中归属于: 13.220.40 材料和制品的可燃性和燃烧性能,29.020 电气工程综合。
本标准有等同采用的 中文版 GB/T 5169.15-2015 电工电子产品着火危险试验 第15部分:试验火焰 500W火焰 装置和确认试验方法
This part of IEC 60695-11 provides detailed requirements for the production of either of two 500 W nominal@ pre-mixed type test flames. The approximate overall height of each flame is 125 mm. Two methods of producing a test flame are described: Method A uses methane. Method C can use either methane or propane. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is@ wherever applicable@ to make use of basic safety publications in the preparation of its publications. The requirements@ test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.
参考标准: GB/T2408-2008《塑料燃烧性能的测试-水平法和垂直法》(ANSI/UL94 -2006) GBT10707-2008《橡胶燃烧性能的测定 》方法B GJB360B-2009电子及电气元件试验方法 GB/T 5169.16-2008 电工电子产品着火危险试验 第16部分_ 试验火焰 50W水平与垂直火焰试验方法 ANSI/UL94 IEC60950-1、 IEC695-2-2 2...
适用标准: GB/T 4706 GB/T 5169.5《电工电子产品着火危险性试验第5部分试验火焰针焰试验方法装置、确认试验方法和导则》 IEC 60695-2-2《电工电子产品着火危险试验第2部分:试验方法第2篇:针焰试验》 主要参数: 01.针状燃烧器:不锈钢,内孔Φ0.5±0.1mm,外径≤Φ0.9mm,长≥35mm; 02.燃烧器角度:垂直(调节和测量火焰高度时...
部分:试验火焰 500W火焰 装置和确认试验方法 GB/T 5169.22-2015 电工电子产品着火危险试验 第22部分:试验火焰 50W火焰 装置和确认试验方法 GB/T 5169.35-2015 电工电子产品着火危险试验 第35部分:燃烧流的腐蚀危害 总则 GB/T 5169.36-2015 电工电子产品着火危险试验 第36部分:燃烧流的腐蚀危害 试验方法概要和相关性 GB/T 5169.39...
水平垂直燃烧试验利用标准规定尺寸的本生灯和特定燃气源 ( 甲烷或丙烷 ) ; 按一定的火焰高度和一定的施焰角度对呈水平或垂直状态的试品定时施燃,根据点燃、灼热燃烧的持续时间和燃烧长度等来评定其可燃性及着火危险性。 HVUL94水平垂直燃烧试验仪主要针对 HB&V级(50W)和 5V级(500W)材料的可燃性进行定级评定。 ...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号