ASTM D6764-02(2013)
开放渠道水温, 溶解氧浓度, 比电导率和pH数据收集的标准指南

Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels

被代替

标准号

ASTM D6764-02(2013)

发布

2002年

发布单位

美国材料与试验协会

替代标准

ASTM D6764-02(2019)

当前最新

ASTM D6764-02(2019)

 

 

引用标准

ASTM D1125 ASTM D1129 ASTM D1293 ASTM D4410 ASTM D4411 ASTM D5464 ASTM D888

适用范围

5.1 This guide describes stabilization criteria for recording field measurements of Temperature, DO, SC, and pH.

5.2 This guide describes the procedures used to calibrate and check meters to be used in the field to records these measurements and the procedures to be use in the field to obtain these data.

5.3 This guide describes quality assurance procedures to be followed when obtaining cross-sectional means of temperature, dissolved oxygen, specific electrical conductance, and pH of water flowing in open channels.

TABLE 1 Stabilization Criteria for Recording Field Measurements (1)

Note 1—[±, plus or minus value shown; °C, degrees Celsius; ≤ less than or equal to values shown; μS/cm microsiemens at 25°C, gt;, greater than value shown; unit, standard pH unit; mg/L milligram per liter].

Standard Direct Field Measurement	Stabilization Criteria for Measurements (Variability Should Be Within the Value Shown)
Temperature: 8199;Electronic Temperature Sensor 8199;Liquid-in-glass thermometer	±0.2°C ±0.5°C
Specific Electrical Conductance: 8199;when ≤ 100 mS/cm 8199;when gt; 100 mS/cm	±58201;% ±58201;%
pH: 8199;Meter displays to 0.01	±0.1 unit
Dissolved oxygen: 8199;Amperometric method	±0.3 mg/L

5.4 Field measurement must accurately represent the water flowing in the open channel being measured. Methods need to be used that will result in an accurate representation of the mean of the parameter of interest. Procedures must be used that will take into consideration the variation in the parameter across the sections and with depth.

5.5 ......

公众开放 | 喜迎二十大，科普向未来——环保设施向公众开放活动走出了环境监测实验室

讲解员开始介绍湿地系统的建设情况，讲解湿地作为“地球之肾”的重要性、湿地系统处理污水的原理，并现场采集不同工艺断面的水样，利用便捷式多参数分析仪监测水温、pH、溶解氧、电导率等参数，同学们直观的了解到氧化塘、潜流湿地、表流湿地等各种设施的处理效果。电导率下降了，溶解氧升高了，水温、pH稳定，同学们一边参与，一边记录。...

世界水日，与您细数水质监测的林林总总

测定浊度的方法有目视比浊法、分光光度法、浊度计法等。电导率以数字表示溶液传导电流的能力。总结滴定法：COD、高锰酸盐指数、溶解氧分光光度法：氨氮、总氮、总磷、铜、铬、浊度电极法：pH值、溶解氧、电导率仪器法：TOC、汞、浊度愿水质清冽、世界美好。阅过此文，起身倒杯水喝吧：）...

地表水、地下水、降水、废水采样要点

以下为正文地表水采样01采样断面应有明显的标志物，采样人员不得擅自改动采样位置。采样时应使用GPS定位或固定标志物确定采样位置，以保证采样点位置的准确。02水温、pH值、溶解氧、电导率、透明度、盐度等项目建议现场监测。03对于河流断面，可以使用测距仪和测深计，测量河流的宽度和深度；对于湖库点位，可以使用测深计，测量湖库深度。...

水质采样过程的质量控制措施

温馨提示：点击海报可放大海报以下为正文地表水采样(1) 采样断面应有明显的标志物，采样人员不得擅自改动采样位置。采样时应使用GPS定位或固定标志物确定采样位置，以保证采样点位置的准确。(2) 水温、pH值、溶解氧、电导率、透明度、盐度等项目建议现场监测。(3) 对于河流断面，可以使用测距仪和测深计，测量河流的宽度和深度；对于湖库点位，可以使用测深计，测量湖库深度。...