SAE/USCAR-17-2013
汽车无线电射频(RF)连接器系统的性能规格

Performance specification for automotive RF connector systems

SAE/USCAR-17-2013 发布历史

1. Procedures included within this specification are intended to cover performance testing at all phases of development, production, and field analysis of electrical terminals, connectors and components for coaxial cable connection systems (hereafter referred to as RF connectors) intended for road vehicle applications. 2. The intent of this specification is to qualify RF connectors that operate at frequencies from 70 MHz to 3 GHz. The characteristic impedance of the SMB/FAKRA connection system is 50 ohms however this specification does not exclude the use of these RF connectors on non-50 ohm cables or systems. 3. This specification does not apply to single

SAE/USCAR-17-2013由美国机动车工程师协会 US-SAE 发布于 2013-03-22。

SAE/USCAR-17-2013 在中国标准分类中归属于: T36 电子、电气设备，在国际标准分类中归属于: 43.040.10 电气和电子设备。

SAE/USCAR-17-2013 发布之时，引用了标准

• DIN 72594-1-2006 道路车辆.50ohm射频接口.第1部分:一般要求
• EIA-364-30A-2002 
• IEC 60512-23-3-2000 电子设备用电机元件.基本试验程序和测量方法.第23-3部分:试验23c.连接件和附属件的屏蔽效应
• IEC 61196-1-2005 同轴通信电缆.第1部分:总规范.总则、定义和要求
• IEC 61726-1999 电缆配件、电缆、连接器和无源微波元件.利用混响室法测量滤屏衰减
• ISO 20860-1-2008 道路车辆.50 ohms阻抗无线电频率连接系统接口.第1部分:尺寸和电气要求
• SAE/USCAR-19-1-2003 
• SAE/USCAR-25-1-2008 电气连接器组件人类工效学设计标准

SAE/USCAR-17-2013的历代版本如下：

• 2013年03月22日 SAE/USCAR-17-2013 汽车无线电射频(RF)连接器系统的性能规格
• 2013年03月22日 SAE/USCAR-17-4-2013

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 SAE/USCAR-17-2013 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

SAE/USCAR-17-2013

发布日期

2013年03月22日

实施日期

废止日期

无

中国标准分类号

T36

国际标准分类号

43.040.10

发布单位

US-SAE

引用标准

DIN 72594-1-2006 EIA-364-30A-2002 IEC 60512-23-3-2000 IEC 61196-1-2005 IEC 61726-1999 ISO 20860-1-2008 MIL-PRF-39012-2008 SAE/USCAR-2-2007 SAE/USCAR-18-2003 SAE/USCAR-19-1-2003 SAE/USCAR-25-1-2008

被代替标准

SAE/USCAR-17-2004

适用范围

1. Procedures included within this specification are intended to cover performance testing at all phases of development, production, and field analysis of electrical terminals, connectors and components for coaxial cable connection systems (hereafter referred to as RF connectors) intended for road vehicle applications. 2. The intent of this specification is to qualify RF connectors that operate at frequencies from 70 MHz to 3 GHz. The characteristic impedance of the SMB/FAKRA connection system is 50 ohms however this specification does not exclude the use of these RF connectors on non-50 ohm cables or systems. 3. This specification does not apply to single