PD CEN/TS 14999-2013
热塑管道系统粘合剂.贮存容器加速老化测试
Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container
PD CEN/TS 14999-2013 发布历史
This Technical Specification describes a method for an accelerated ageing test of an adhesive in its container. The result provides the manufacturer with an indication of the storage stability of the adhesive and container combination and their ability to retain adhesive properties. The method described is intended for solvent based adhesives for thermoplastic piping systems but may be applied to other adhesive types if appropriate. The method described in this Technical Specification does not give a correlation between the results obtained after the accelerated ageing test and after the shelf life of the adhesive at the ambient conditions defined by the manufacturer in the data sheet. NOTE Some of the solvents used in adhesives applied for bonding pipe joints are highly flammable and may even cause explosion when heated (tetrahydrofurane). Therefore, the users of this standard need to take special precautions when testing such adhesives according to the provisions of this standard which require prolonged heating of the container with the adhesive.
PD CEN/TS 14999-2013由欧洲标准化委员会 IX-CEN 发布于 2013-05-01，并于 2013-05 实施。
PD CEN/TS 14999-2013 在中国标准分类中归属于: G39 胶粘剂，在国际标准分类中归属于: 83.180 粘合剂和胶粘产品。
PD CEN/TS 14999-2013 发布之时，引用了标准
- EN 12092-2001 胶粘剂.粘度测定*， 2022-12-17 更新
- EN 14680-2006 非压力热塑管道系统用粘合剂.规范*， 2022-12-17 更新
- EN 14814-2007 压力下流体用热塑性管道系统的粘合剂.规范
- EN ISO 9311-1-2005 热塑管道系统用胶粘剂.第1部分:胶粘膜特性的测定 ISO 9311-1-2005
- EN ISO 9311-2-2011 热塑性管道系统的粘合剂.第2部分:剪切强度的测定
* 在 PD CEN/TS 14999-2013 发布之后有更新，请注意新发布标准的变化。
PD CEN/TS 14999-2013的历代版本如下：
- 2013年05月01日 PD CEN/TS 14999-2013
- 标准号
- PD CEN/TS 14999-2013
- 发布日期
- 2013年05月01日
- 实施日期
- 2013年05月
- 废止日期
- 无
- 中国标准分类号
- G39
- 国际标准分类号
- 83.180
- 发布单位
- 欧洲标准化委员会
- 引用标准
- EN 923+A1-2008 EN 12092-2001 EN 14680-2006 EN 14814-2007 EN ISO 9311-1-2005 EN ISO 9311-2-2011
- 被代替标准
- CEN/TS 14999-2006 FprCEN/TS 14999-2011
- 适用范围
- This Technical Specification describes a method for an accelerated ageing test of an adhesive in its container. The result provides the manufacturer with an indication of the storage stability of the adhesive and container combination and their ability to retain adhesive properties. The method described is intended for solvent based adhesives for thermoplastic piping systems but may be applied to other adhesive types if appropriate. The method described in this Technical Specification does not give a correlation between the results obtained after the accelerated ageing test and after the shelf life of the adhesive at the ambient conditions defined by the manufacturer in the data sheet. NOTE Some of the solvents used in adhesives applied for bonding pipe joints are highly flammable and may even cause explosion when heated (tetrahydrofurane). Therefore, the users of this standard need to take special precautions when testing such adhesives according to the provisions of this standard which require prolonged heating of the container with the adhesive.