4.1 Ionizing radiation produces physical or chemical changes in many materials that can be measured and related to absorbed dose. Materials with radiation-induced changes that have been thoroughly studied can be used as dosimeters in radiation processing.
4.2 Before a material can be considered for use as a dosimeter, certain characteristics related to manufacture and measurement of its response to ionizing radiation need to be considered, including:
4.2.1 the ability to manufacture batches of the material with evidence demonstrating a reproducible radiation-induced change,
4.2.2 the availability of instrumentation for measuring this change, and
4.2.3 the ability to take into account effects of influence quantities on the dosimeter response and on the measured absorbed-dose values.
4.3 Dosimeter/dosimetry system characterization is conducted to determine the performance characteristics for a dosimeter/dosimetry system related to its capability for measuring absorbed dose. The information obtained from dosimeter/dosimetry system characterization includes the reproducibility of the measured absorbed-dose value, the useful absorbed-dose range, effects of influence quantities, and the conditions under which the dosimeters can be calibrated and used effectively.
4.4 The influence quantities of importance might differ for different radiation processing applications and facilities. For references to standards describing different applications and facilities, see ISO/ASTM Practice 52628.
4.5 Classification of a dosimeter as a type I dosimeter or a type II dosimeter (see ISO/ASTM Practice 52628) is based on performance characteristics related to the effects of influence quantities obtained from dosimeter/dosimetry system characterization.
4.6 The dosimeter manufacturer or supplier is responsible for providing a product that meets the performance characteristics defined in product specifications, certificates of conformance, or similar types of documents. Dosimeter specifications should be developed based on dosimeter/dosimetry system characterization.
4.7 The user has the responsibility for ensuring that the dosimetry requirements for the specific applications are met and that dosimeter/dosimetry system characterization information has been considered in:
4.7.1 determining the suitability of the dosimeter or dosimetry system for the specific application (see ISO/ASTM Practice 52628),
4.7.2 selecting the calibration method (see ISO/ASTM Guide 51261),
4.7.3 establishing dosimetry sy......
EPD结合了强大的辐射测量性能和先进的软硬件,符合IEC1283, IEC1526, ANSI 13.11, 13.27和42.20等标准。适合于单独作为剂量计使用或者作为综合剂量管理系统的组成部分使用。赛默飞EPD电子个人剂量计是唯一通过2007年IAEA所有测试项目的电子个人剂量计,完全符合上述标准,已经在国内外得到了广泛的应用和认可。...
EPD TruDose 的应用范围能源和研究军事医疗工业为了保障医患拥有健康、安全的工作和就诊环境,除了赛默飞EPD TruDose电子个人剂量计外,我们还有很多应用于医疗行业的便携式测量仪、个人剂量测量系统、环境监测系统、手脚/衣物/地板污染监测系统、通道式辐射监测系统、医疗废弃物辐射监测系统等应用于医疗辐射行业的检测类产品和解决方案。...
丙氨酸剂量计辐照 6 kGy 吸收剂量的 EPR 波谱丙氨酸 EPR 剂量测量系统可作为参考标准和传递标准。也可作为辐射应用中(包括:医疗保健产品和药品的灭菌消毒、食品辐照、聚合物改性、医学治疗和材料的辐射损伤研究等方面)的工作剂量测量系统。 ...
电子个人剂量计,主要探测X、γ和β辐射,可以给出直读剂量当量Hp(10)(深层/全身)和Hp(0.07)(浅层/皮肤)的剂量数值。它结合了强大的辐射测量性能和的软硬件,符合IEC1283,IEC1526,ANSI13.11,13.27和42.20等标准。适合于单作为剂量计使用或者作为综合剂量管理系统的组成部分使用。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号