ASTM D7978-14
采用不流动的触变胶体培养法测定燃料和有关的水中能独立生存的好氧微生物含量的标准试验方法

Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method

被代替

标准号

ASTM D7978-14

发布

2014年

发布单位

美国材料与试验协会

替代标准

ASTM D7978-14(2019)

当前最新

ASTM D7978-14(2019)

 

 

引用标准

ASTM D1129 ASTM D1655 ASTM D4175 ASTM D4176 ASTM D6469 ASTM D6974 ASTM D7464 ASTM D7847 ASTM D975 ASTM E2756 ISO 8217

适用范围

5.1 This test method is intended to provide a tool for assessing whether fuel storage and distribution facilities or end user fuel tanks are subject to microbial growth and alert fuel suppliers or users to the potential for fuel quality or operational problems and/or the requirement for preventative or remedial measures.

5.2 This test method detects numbers of microbial colony forming units (CFU), the same detection parameter used in the laboratory standard procedures Practice D6974 and IP 385. However, whereas Practice D6974 and IP 385 provide separate assessment of numbers of viable aerobic bacteria CFU and numbers of viable fungal CFU, this test method provides a combined total count of viable aerobic bacteria and fungal CFU.

5.3 This test method is designed to detect a recognized group of microorganisms of significance in relation to contamination of distillate fuels, but it is recognized that microbiological culture techniques do not detect all microorganisms that can be present in a sample. Culturability is affected primarily by the ability of captured microbes to proliferate on the growth medium provided, under specific growth conditions. Consequently, a proportion of the active or inactive microbial population present in a sample can be viable but not detected by any one culture test.7 In this respect, the test is indicative of the extent of microbial contamination in a sample ,and it is assumed that when a fuel sample is significantly contaminated, some of the dominant microbial species present will be quantifiably detected, even if not all species present are culturable.

5.4 Many samples from fuel systems can be expected to contain a low level of “background” microbial contamination, which is not necessarily of operational significance. The minimum detection level of this test method is determined by the volume of specimen tested and is set such that microbial contamination will generally only be detected when it is at levels indicative of active proliferation.

5.5 The test will detect culturable bacteria and fungi that are metabolically active and dormant fungal spores. Presence of fungal spores in a fuel sample can be indicative of active microbial proliferation within a fuel tank or system, but at a point distant from the location sampled. Active microbial growth only occurs in free water, and this can be present only as isolated pockets at tank or system low points. Because fungal spores are more hydrophobic than active cells and fungal material (mycelium), they disperse more readily in fuel phase and are thus more readily detected when low points cannot be directly sampled and only fuel phase is present in samples.

5.6 This test method can determine whether microbial contamination in samples drawn from fuel tanks and systems is absent or present at light, moderate, and heavy levels.

5.7 The categorization of light, moderate, and heavy levels of contamination will depend on the fuel type, the sampling location, the facility sampled, and its specific operating circumstances.

......

污水处理厂水质化验操作要点的最全总结

1、废水的主要物理特性指标有哪些？(1) 温度：废水的温度对废水处理过程的影响很大，温度的高低直接影响微生物活性。一般城市污水处理厂的水温为10～25摄氏度之间，工业废水温度的高低与排放废水的生产工艺过程有关。(2) 颜色：废水的颜色取决于水中溶解性物质、悬浮物或胶体物质的含量。新鲜的城市污水一般是暗灰色，如果呈厌氧状态，颜色会变深、呈黑褐色。...

​屠宰鸡、鸭、鹅废水如何处理

屠宰鸡、鸭、鹅废水如何处理有机质废水由反应器底部进水器向上流动，氧化池内装有YDT-Ⅱ立体弹性填料，填料上长着微生物，使其表面形成一层生物膜，将污水中的有机物与生物膜接触，并将其吸附分解，达到去除的目的(生物膜法)。因为好氧微生物生存所必须的氧气，因此在氧化池的底部设置了一个充气装置，空气从池底进入与废水接触，这就使得废水具有足够的溶解氧(活性污泥法)。该技术对高浓度有机废水的处理具有独到之处。...

石油化工废水处理工艺汇总

3.4 好氧生物处理好氧生物处理是目前普遍采用的生物处理方法，因其处理成本低，运行操作简单，在大多数的工业废水处理中被广泛采用。康雪琴等对传统活性污泥法进行改进，采用氧气曝气法处理高COD、含硫、含氨的石油化工废水，试验对氧曝和空曝进行了对比。...

适合现场监测的水质指标

溶解氧还影响水生生物的生存,如当溶解氧低于4mg/L时,许多鱼类的呼吸会发生困难,甚至窒息而死。在废水生化处理过程中,往往要通过曝气提供充足的溶解氧以供微生物降解污染物质之需。当然,水中的溶解氧含量并非总是越高越好,如锅炉用水的溶解氧含量就有一定限制,否则会造成腐蚀。水中溶解氧的含量与大气中氧的分压、水温和水中含盐量等因素有密切关系。...