ASTM D3886-99(2015)由美国材料与试验协会 US-ASTM 发布于 1999。
ASTM D3886-99(2015)在国际标准分类中归属于: 59.080.30 纺织物。
ASTM D3886-99(2015) 纺织物耐磨性的标准试验方法 (膨胀膜法)的最新版本是哪一版?
最新版本是 ASTM D3886-22 。
* 在 ASTM D3886-99(2015) 发布之后有更新,请注意新发布标准的变化。
5.1 The measurement of the resistance to abrasion of textile and other materials is very complex. The resistance to abrasion is affected by many factors, such as the inherent mechanical properties of the fibers; the dimensions of the fibers; the structure of the yarns; the construction of the fabrics; and the type, kind, and amount of finishing material added to the fibers, yarns, or fabric.
5.2 The resistance to abrasion is also greatly affected by the conditions of the tests, such as the nature of abradant, variable action of the abradant over the area of specimen abraded, the tension of the specimen, the pressure between the specimen and abradant, and the dimensional changes in the specimens.
5.3 Abrasion tests are all subject to variation due to changes in the abradant during specific tests. The abradant must accordingly be discarded at frequent intervals or checked periodically against a standard. With disposable abradants, the abradant is used only once or discarded after limited use. With permanent abradants that use hardened metal or equivalent surfaces, it is assumed that the abradant will not change appreciably in a specific series of tests. Similar abradants used in different laboratories will not change at the same rate, due to differences in usage. Permanent abradants may also change due to pick up of finishing or other material from test fabrics and must accordingly be cleaned at frequent intervals. The measurement of the relative amount of abrasion may also be affected by the method of evaluation and may be influenced by the judgment of the operator.
5.4 The resistance of textile materials to abrasion as measured on a testing machine in the laboratory is generally only one of several factors contributing to wear performance or durability as experienced in the actual use of the material. While “abrasion resistance” (often stated in terms of the number of cycles on a specified machine, using a specified technique to produce a specified degree or amount of abrasion) and “durability” (defined as the ability to withstand deterioration or wearing out in use, including the effects of abrasion) are frequently related, the relationship varies with different end uses, and different factors may be necessary in any calculation of predicted durability from specific abrasion data. Laboratory tests may be reliable as an indication of relative end-use performance in cases where the difference in abrasion resistance of various materials is large, but they should not be relied upon where differences in laboratory test findings are small. In general, they should not be relied upon for prediction of actual wear-life in specific end uses unless there are data showing the specific relationship between laboratory abrasion tests and actual wear in the intended end-use.
5.5 These general observations apply to all types of fabrics, including woven, nonwoven, and knit apparel fabrics, household fabrics, industrial fabrics, and floor coverings. It is not surprising, therefore, to find that there are many different types of abrasion testing machines, abradants, testing conditions, testing procedures, methods of evaluation of abrasion resistance and interpretation of results.
5.6 All the test methods and instruments so far developed for measuring abrasion resistance may show a high degree of variabilit......
-2007 纺织品 马丁代尔法织物耐磨性的测定 第3部分:质量损失的测定GB/T 3903.16-2008 鞋类 帮面、衬里和内垫试验方法 耐磨性能GB/T 13775-1992 棉、麻、绢丝机织物耐磨试验方法GB/T 25262-2010硫化橡胶或热塑性橡胶 三、磨耗试验指南以上给出的标准,是国际现行的几个有影响力的标准化组织发布的织物耐磨性测试-马丁代尔方法的标准。...
中国国家检测标准 (一)试验标准 GB/T21196.1-200丙纺织品马丁代尔法织物耐磨性的测定第1部分马丁代尔耐磨 试验仪》。 GB/T21196.2-2007《纺织品马丁代尔法织物耐磨性的测定第2部分试样破损的测定》。 GB/T21196.3-2007《纺织品马丁代尔法织物耐磨性的测定第3部分质量损失的测定》。 ...
该原理对应于标准规定的织物耐磨性能试验。 ...
ASTM D4966纺织品用马丁代尔法对织物抗磨损性的测定ISO12945-2纺织品、织物表面起毛起球倾向性的测定ISO12947纺织品织物耐磨性马丁代尔法的测定-试样破裂的测定相关产品关健词:织物平磨仪/织物起毛起球测试仪适用于测试各类纺织物材料的耐磨起毛起球性能的评定,GB耐磨试验机主要答合国家标准适用于测试各类鞋衬织物的耐磨性能测试。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号