非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 ASTM C1171-15 前三页，或者稍后再访问。
您也可以尝试购买此标准，
点击右侧 “购买” 按钮开始采购（由第三方提供）。
点击下载后，生成下载文件时间比较长，请耐心等待......
3.1 This test method indicates the ability of a refractory product to withstand the stress generated by sudden changes in temperature.
3.2 Because the recommended furnace temperature of this cycling test is 1200°C (2190°F), this test method may not indicate the ability of a refractory product to withstand cycling at higher or lower temperatures, especially if the existing morphology of the refractory product changes.
3.3 This test method is useful for research and development, as well as for comparing refractory products. The precision should be considered when using this test for specification purposes.
3.4 Ruggedness tests found the following variables to be rugged:
| temperature | +5°C |
| hot spacing | 1/2 to 3/4 in. (12.77 to 19 mm) |
| cold spacing | 1/2 to 3/4 in. (12.77 to 19 mm) |
| center vs. end gripping of the bars | |
| hot hold time | 10 to 15 min |
| cold hold time | 10 to 15 min |
| operator air speed | 0 to 2 mi/h (0 to 3.2 km/h) |
| initially cold or heated samples | |
| last in, first out (LIFO); or first in, first out (FIFO) | |
| sawed or original surface as tensile face during MOR testing | |
| bar thickness | 0....... 利曼中国将参加2015中国国际冶金展(上海3.31-4.3)
使用已建立的试验方法（如国际标准的ASTM，ISO，DIN，UNI和其他国际标准），保证只需几步简单操作，即可得到精准结果。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved |