SAE AMS 4162E-2014 发布历史

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing. These extrusions have been used typically for structural parts requiring high strength up to 500 degrees F (260 degrees C), but usage is not limited to such applications. May be welded in the specified condition but properties are improved by reheat treatment after welding. Reheat treatment after welding, however, may reduce resistance to stress-corrosion cracking.

SAE AMS 4162E-2014由美国机动车工程师协会 US-SAE 发布于 2014-09-01。

SAE AMS 4162E-2014在国际标准分类中归属于: 49.025.20 铝。

SAE AMS 4162E-2014 发布之时，引用了标准

SAE AMS 2355K-2011 铝合金和镁合金锻造(除锻坯外)和轧制产品,锻造或闪速对焊环的抽样和测试质量保证
SAE AMS 2772F-2011 铝合金原材料的热处理

SAE AMS 4162E-2014的历代版本如下：

2014年09月01日 SAE AMS 4162E-2014

SAE AMS 4162E-2014 由 SAE AMS 4162D-2003 变更而来。

非常抱歉，我们暂时无法提供预览，您可以试试：免费下载 SAE AMS 4162E-2014 前三页，或者稍后再访问。

注意：点击下载后，生成下载文件时间比较长，请耐心等待......

标准号: SAE AMS 4162E-2014
发布日期: 2014年09月01日
实施日期
废止日期: 无
中国标准分类号
国际标准分类号: 49.025.20
发布单位: US-SAE
引用标准: ANSI H 35.2-2013 ANSI H 35.2M-2013 ASTM B 594-2013 ASTM B 660-2008 ASTM B 666/B 666M-2008 ASTM G 47-1998 SAE AMS 2355K-2011 SAE AMS 2772-1997 SAE AMS 2772F-2011 SAE AS 1990-1990 SAE AS 1990A-1998 ASGMG47
被代替标准: SAE AMS 4162D-2003

适用范围: This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing. These extrusions have been used typically for structural parts requiring high strength up to 500 degrees F (260 degrees C), but usage is not limited to such applications. May be welded in the specified condition but properties are improved by reheat treatment after welding. Reheat treatment after welding, however, may reduce resistance to stress-corrosion cracking.

SAE AMS 4162E-2014

Aluminum Alloy@ Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated@ Stress Relief Stretched@ Straightened@ and Precipitation Heat Treated (UNS A92219)