ASTM D6243/D6243M-16
采用直接剪切方法测定土工合成粘土衬里内层和界面剪切强度的标准试验方法

Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method

被代替

标准号

ASTM D6243/D6243M-16

发布

2016年

发布单位

美国材料与试验协会

替代标准

ASTM D6243/D6243M-20

当前最新

ASTM D6243/D6243M-20

 

 

引用标准

ASTM D1557 ASTM D2435/D2435M ASTM D2487 ASTM D3080/D3080M ASTM D3740 ASTM D4439 ASTM D5321/D5321M ASTM D6072/D6072M ASTM D653 ASTM D698

适用范围

5.1 The procedure described in this test method for determination of the shear resistance for the GCL or the GCL interface is intended as a performance test to provide the user with a set of design values for the test conditions examined. The test specimens and conditions, including normal stresses, are generally selected by the user.

5.2 This test method may be used for acceptance testing of commercial shipments of GCLs, but caution is advised as outlined in 5.2.1.

5.2.1 The shear resistance can be expressed only in terms of actual test conditions (see Notes 2 and 3). The determined value may be a function of the applied normal stress, material characteristics (for example, of the geosynthetic), soil properties, size of sample, moisture content, drainage conditions, displacement rate, magnitude of displacement, and other parameters.

Note 2: In the case of acceptance testing requiring the use of soil, the user must furnish the soil sample, soil parameters, and direct shear test parameters. The method of test data interpretation for purposes of acceptance should be mutually agreed to by the users of this standard.

Note 3: Testing under this test method should be performed by laboratories qualified in the direct shear testing of soils and meeting the requirements of Practice D3740, especially since the test results may depend on site-specific and test conditions.

5.2.2 This test method measures the total resistance to shear within a GCL or between a GCL and adjacent material. The total shear resistance may be a combination of sliding, rolling and interlocking of material components

5.2.3 This test method does not distinguish between individual mechanisms, which may be a function of the soil and GCL used, method of material placement and hydration, normal and shear stresses applied, means used to hold the GCL in place, rate of horizontal displacement, and other factors. Every effort should be made to identify, as closely as is practicable, the sheared area and failure mode of the specimen. Care should be taken, including close visual inspection of the specimen after testing, to ensure that the testing conditions are representative of those being investigated.

5.2.4 Information on precision between laboratories is incomplete. In cases of dispute, comparative tests to determine whether a statistical bias exists between laboratories may be advisable.

5.3 The test results can be used in the design of GCL applications, including but not limited to, the design of liners and caps for landfills, cutoffs for dams, and other hydraulic barriers.

5.4 The displacement at which peak strength and post-peak strength occurs and the shape of the shear s......

海洋工程勘察丨如何科学获取岩土工程参数？

海上室内试验的标准试验类型：试样挤出试验试样描述(岩土工程描述和地质描述)试样拍照含水量土体单位重量抗剪强度指标测试(目的是快速得到不排水抗剪强度)落锥试验微型贯入仪电动十字板不排水不固结三轴试验(UU)陆地室内试验管道和输电线缆项目的室内试验需要测试3m以上土的参数土质分类及强度指标实验是最重要的对于某些特殊目的例如碎石支撑土等，需要通过三轴试验和直剪试验测定土体的强度有时需要对一些填土进行热力学参数测试自升式平台项目的室内试验需要土体强度参数用于贯入腿分析...

土工格栅的直剪试验试验结果与分析

一般外用于测定土工合成材料与土之间的界面特性的方法有直剪摩擦试验和拉拔试验。随着土工合成材料技术的发展，各种高强度的土工合成材料，如单向土工格栅、经编土工格栅得到了广泛的应用，填料种类也有所改变。...