ASTM D6504-2011(2016)e1
在线检测高纯度水中阳离子导电性的标准实施规程
Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
说明：
- 此图仅显示与当前标准最近的5级引用；
- 鼠标放置在图上可以看到标题编号；
- 此图可以通过鼠标滚轮放大或者缩小；
- 表示标准的节点，可以拖动；
- 绿色表示标准：ASTM D6504-2011(2016)e1 ， 绿色、红色表示本平台存在此标准，您可以下载或者购买，灰色表示平台不存在此标准；
- 箭头终点方向的标准引用了起点方向的标准。
- 标准号
- ASTM D6504-2011(2016)e1
- 发布日期
- 2011年
- 实施日期
- 废止日期
- 无
- 国际标准分类号
- 13.060.60
- 发布单位
- 美国材料与试验协会
- 适用范围
5.1x00a0;Cation conductivity provides one of the most sensitive and dependable on-line means of detecting anionic contamination in the boiler/steam cycle, such as chlorides, sulfates, nitrates, bicarbonates, and organic acids, such as formic and acetic.
5.2x00a0;High sensitivity is provided by intentionally eliminating the pH adjusting treatment chemical(s), for example, ammonia and amines, from the sample and converting remaining salt contaminants into their acid forms which are approximately three times as conductive.
5.3x00a0;Guidelines on cation conductivity limits for various cycle chemistry and boiler types have been established by EPRI (2-4) and by ASME (5 and 6).
5.4x00a0;The sample effluent from the cation exchange column also may be used, and in some cases is preferred, for ion chromatography or other anion measurements.
1.1x00a0;This practice describes continuous sample conditioning by hydrogen ion exchange and measurement by electrolytic conductivity. It is commonly known as cation conductivity measurement in the power industry although it is actually an indication of anion contamination in high purity water samples. Measurements are typically in a range less than 1 x03bc;S/cm.
1.2x00a0;The actual conductivity measurements are made using Test Method D5391.
1.3x00a0;This practice does not provide for separate determination of dissolved carbon dioxide. Refer to Test Method D4519.
1.4x00a0;The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.